EUVIMEDEUVIMED entdecken
Crossref

Comparison of the result of notched three point bending test with Model Code 2010 formulas

Viktor Hlavicka

Concrete Structures · 2021

DOI: 10.32970/cs.2021.1.2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Concrete Structures, 2021. Verfasst von Viktor Hlavicka.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The primary application of the notched three point bending test (3PBT) is to determine the fracture energy of concrete. However, the measurement setup is also suitable for determining additional mechanical parameters: flexural tensile strength, modulus of elasticity, and indirectly the compressive strength also. The aim of this paper is to present the calculation methods of the mechanical properties that can be determined from the results of a test series in which mixtures with different types of aggregates were used (quartz, dolomite, limestone, andesite, expanded clay). To validate the obtained results, the parameters determined from the measurements are compared to the formulas of the fib Model Code 2010. A recommendation is also presented for the calculation of the fracture energy by using compressive strength values measured on a half prism.

Zitieren

APA

Hlavicka, V. (2021). Comparison of the result of notched three point bending test with Model Code 2010 formulas. Concrete Structures. https://doi.org/10.32970/cs.2021.1.2

Vancouver

Hlavicka V. Comparison of the result of notched three point bending test with Model Code 2010 formulas. Concrete Structures. 2021. doi:10.32970/cs.2021.1.2

BibTeX
@article{Hlavicka2021,
  author = {Hlavicka, Viktor},
  title = {Comparison of the result of notched three point bending test with Model Code 2010 formulas},
  journal = {Concrete Structures},
  year = {2021},
  doi = {10.32970/cs.2021.1.2}
}
Kostenlos starten →