EUVIMEDEUVIMED entdecken
Crossref

Effects of pouring technique on orientation of steel and synthetic macrofibres in fibre-reinforced concrete

Károly Péter Juhász

Concrete Structures · 2020

DOI: 10.32970/cs.2020.1.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Concrete Structures, 2020. Verfasst von Károly Péter Juhász. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fibre-reinforced concrete is a short-fibre composite material, whose properties are significantly dependent on the orientation of the mixed fibres. As a starting point, the fibres are assumed to be uniformly distributed and have a uniform orientation. However, in reality, they have a non-uniform distribution owing to various factors. Such deviations in the orientation may have a significant effect on the material parameters, both favourable and unfavourable. In this study, the orientation factors determined based on the mixing models reported in the literature are compared with the results of experimental tests performed in the laboratory, and the effects of the formwork and the pouring methods used on the orientation of both steel and synthetic macrofibres are investigated. Based on the results of the study, the orientation of the fibres (both, steel and macro synthetic) significantly depends on the pouring method, which considerably influences the material parameters of fibre-reinforced concrete.

Zitieren

APA

Juhász, K. P. (2020). Effects of pouring technique on orientation of steel and synthetic macrofibres in fibre-reinforced concrete. Concrete Structures. https://doi.org/10.32970/cs.2020.1.1

Vancouver

Juhász KP. Effects of pouring technique on orientation of steel and synthetic macrofibres in fibre-reinforced concrete. Concrete Structures. 2020. doi:10.32970/cs.2020.1.1

BibTeX
@article{Juhsz2020,
  author = {Juhász, Károly Péter},
  title = {Effects of pouring technique on orientation of steel and synthetic macrofibres in fibre-reinforced concrete},
  journal = {Concrete Structures},
  year = {2020},
  doi = {10.32970/cs.2020.1.1}
}
Kostenlos starten →