EUVIMEDEUVIMED entdecken
Crossref

Transient thermal rectification in stacked polymer composites with a through-thickness BN microplatelet orientation gradient

Ryang-Im Kang, Dong-Wook Oh

High Temperatures-High Pressures · 2026 · 55 (3-4) · 273-289

DOI: 10.32908/hthp.v55.2120 ↗

Kurz gefasst

Fachartikel in der Zeitschrift High Temperatures-High Pressures, 2026. Verfasst von Ryang-Im Kang und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Transient thermal rectification defined as the direction-dependent asymmetry in heat-transfer response before thermal equilibrium, offers a route to passive control of heat spreading without joining dissimilar materials or relying on phase transitions. This study numerically examines how a through-thickness gradient in boron nitride (BN) microplatelet orientation governs the transient response of a stacked anisotropic polymer composite. A two-dimensional,10-layer model with a total thickness of 3 mm was solved using COMSOL Multiphysics. Each layer was represented by a rotated effective thermal-conductivity tensor with principal values of 12.1 and 0.6 W·m−1·K−1, respectively. The convergent and divergent heat-flow configurations were generated by reversing the same layered structure relative to the heat source. The orientation profile was prescribed by a power-law function, and performance was quantified using peak and time-averaged thermal rectification ratios. For the baseline linear profile, the peak ratio reached 335% at 0.1 s, while the 30-s average was 21.8%. A single-objective genetic algorithm coupled to COMSOL optimized the bottom angle, top angle, and power-law exponent. The optimized peak ratio was 357%, and the 30-s average increased to 28%, corresponding to a 28.4% relative improvement. A nearly linear orientation-angle distribution maximized the peak thermal rectification ratio, whereas a power-law distribution with an exponent smaller than unity enhanced the time-averaged thermal rectification performance. These findings establish orientation-profile design as a tractable strategy for controlling transient heat spreading in bulk anisotropic composites.

Zitieren

APA

Kang, R., & Oh, D. (2026). Transient thermal rectification in stacked polymer composites with a through-thickness BN microplatelet orientation gradient. High Temperatures-High Pressures, 55(3-4), 273-289. https://doi.org/10.32908/hthp.v55.2120

Vancouver

Kang R, Oh D. Transient thermal rectification in stacked polymer composites with a through-thickness BN microplatelet orientation gradient. High Temperatures-High Pressures. 2026;55(3-4):273-289. doi:10.32908/hthp.v55.2120

BibTeX
@article{Kang2026,
  author = {Kang, Ryang-Im and Oh, Dong-Wook},
  title = {Transient thermal rectification in stacked polymer composites with a through-thickness BN microplatelet orientation gradient},
  journal = {High Temperatures-High Pressures},
  year = {2026},
  volume = {55},
  number = {3-4},
  pages = {273--289},
  doi = {10.32908/hthp.v55.2120}
}
Kostenlos starten →