EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative 3D Finite Element Stress Analysis of Monolithic Lithium Disilicate and Dual-Layered Endocrown Restorations

Haider Ali Ibrahim, Haider Hasan Jasim

Mustansiria Dental Journal · 30.12.2025 · 21 (2) · 194-209

DOI: 10.32828/mdj.v21i2.1198 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mustansiria Dental Journal, online erschienen am 30.12.2025. Verfasst von Haider Ali Ibrahim und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

To evaluate and compare the stress distribution of monolithic lithium disilicate (LDS) and dual-layered endocrown restorations for endodontically treated teeth (ETT) using finite element analysis (FEA).

Method

A mandibular first molar model was created using CBCT and CAD software with standardized cavity dimensions and material properties. Two models were designed: Model A (monolithic LDS endocrown) and Model B (dual-layered endocrown with a Lava Ultimate endocore veneered with LDS). FEA simulated stress distribution under a 600 N axial load. The von Mises stress values were analyzed to evaluate stress concentration and distribution.

Result

Model A exhibited higher stress concentration at the occlusal surface and cervical regions, with a maximum von Mises (VM) stress of 17.20 MPa in LDS. In contrast, Model B demonstrated a more uniform stress distribution, with the maximum VM stress reduced to 4.87 MPa in LDS and 4.24 MPa for endocore. Additionally, Model A showed high stress levels at the cervical rim (16.05 MPa), while Model B presented a lower VM stress of 9.88 MPa. Dentin stress was also higher in Model A (4.37 MPa) compared to Model B (3.49 MPa).

Conclusion

Dual-layered endocrowns demonstrated favorable stress distribution compared to monolithic designs, suggesting greater durability for restoring endodontically treated teeth. Experimental validation is recommended.

Zitieren

APA

Ibrahim, H. A., & Jasim, H. H. (2025). Comparative 3D Finite Element Stress Analysis of Monolithic Lithium Disilicate and Dual-Layered Endocrown Restorations. Mustansiria Dental Journal, 21(2), 194-209. https://doi.org/10.32828/mdj.v21i2.1198

Vancouver

Ibrahim HA, Jasim HH. Comparative 3D Finite Element Stress Analysis of Monolithic Lithium Disilicate and Dual-Layered Endocrown Restorations. Mustansiria Dental Journal. 2025;21(2):194-209. doi:10.32828/mdj.v21i2.1198

BibTeX
@article{Ibrahim2025,
  author = {Ibrahim, Haider Ali and Jasim, Haider Hasan},
  title = {Comparative 3D Finite Element Stress Analysis of Monolithic Lithium Disilicate and Dual-Layered Endocrown Restorations},
  journal = {Mustansiria Dental Journal},
  year = {2025},
  volume = {21},
  number = {2},
  pages = {194--209},
  doi = {10.32828/mdj.v21i2.1198}
}
Kostenlos starten →