EUVIMEDEUVIMED entdecken
Crossref

Structural Analysis of Heavy Haul Road in Mining Area Based on ANSYS

Xinyu Liu, Zhen Chen, Haiyu Chang, Haoen Yin, Shijia Cheng

Architecture Engineering and Science · 29.04.2026 · 7 (1) · 41

DOI: 10.32629/aes.v7i1.5038 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Architecture Engineering and Science, online erschienen am 29.04.2026. Verfasst von Xinyu Liu und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mining haul roads are subjected to extreme axle loads and frequent traffic, leading to premature deterioration of conventional pavement structures. To enhance load-bearing capacity and service life, this study proposes an innovative composite reinforced concrete pavement system combining C40 reinforced concrete with roller-compacted concrete (RCC). A three-dimensional finite element model incorporating dowel-joint mechanisms was developed using ANSYS software. Numerical simulations were performed under three critical loading conditions — slab corner, longitudinal joint edge, and transverse joint edge — to comparatively analyze deflection patterns and stress distributions between the proposed composite structure and conventional asphalt pavement. Results demonstrate that the reinforced concrete pavement exhibits substantially lower deflection values, confirming superior overall stiffness. The slab corner was identified as the most critical loading position, exhibiting both maximum deflection and peak stress concentrations. Furthermore, dowel bars effectively facilitated load transfer, reducing maximum compressive stress in the loaded slab by up to 26.8% and significantly improving stress distribution homogeneity. These findings validate the structural advantages of the proposed reinforced concrete system for mining heavy-haul applications and provide theoretical support for optimized engineering design.

Zitieren

APA

Liu, X., Chen, Z., Chang, H., Yin, H., & Cheng, S. (2026). Structural Analysis of Heavy Haul Road in Mining Area Based on ANSYS. Architecture Engineering and Science, 7(1), 41. https://doi.org/10.32629/aes.v7i1.5038

Vancouver

Liu X, Chen Z, Chang H, Yin H, Cheng S. Structural Analysis of Heavy Haul Road in Mining Area Based on ANSYS. Architecture Engineering and Science. 2026;7(1):41. doi:10.32629/aes.v7i1.5038

BibTeX
@article{Liu2026,
  author = {Liu, Xinyu and Chen, Zhen and Chang, Haiyu and Yin, Haoen and Cheng, Shijia},
  title = {Structural Analysis of Heavy Haul Road in Mining Area Based on ANSYS},
  journal = {Architecture Engineering and Science},
  year = {2026},
  volume = {7},
  number = {1},
  pages = {41},
  doi = {10.32629/aes.v7i1.5038}
}
Kostenlos starten →