Design and Implement Low Cost PC-Based Educational Platform for Power Generation Control System
International Journal of Scientific Research in Science, Engineering and Technology · 23.08.2026 · 13 (4) · 347-359
DOI: 10.32628/ijsrset26134130 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Scientific Research in Science, Engineering and Technology, online erschienen am 23.08.2026. Verfasst von Abdullah A. Al-Manfi. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper presents the design and experimental implementation of a low-cost, reliable, and robust PC-based Supervisory Control and Data Acquisition (SCADA) educational platform for centralized Automatic Generation Control (AGC) of power-system generators. The proposed system was developed as a laboratory training platform at the College of Electrical and Electronic Technology, Benghazi, within the higher graduate studies program. The platform provides a practical environment for investigating AGC operation and evaluating control-system performance under different operating conditions. The frequency-bias control strategy was implemented to regulate the frequency of a power system consisting of two generating units using a single controller. The performance of the proposed control scheme was investigated through several case studies in which both the electrical power demand and the controller sleep time were varied. PROFINET communication was established between the Master Terminal Unit (MTU) and Remote Terminal Unit (RTU) using fiber-optic cables and Small Form-factor Pluggable (SFP) transceivers. This communication architecture was adopted to reproduce near-real-time communication behavior while minimizing communication delays and improving immunity to electromagnetic interference. Experimental validation was performed using a three-phase, 380 V, 50 Hz laboratory power system comprising two synchronous generators, each rated at 1.0 kVA, a medium transmission-line model, a 750 W three-phase resistive load, and a 2.5 hp three-phase induction motor with a variable load representing an inductive demand. The experimental results demonstrated satisfactory and stable performance of the proposed control system. Furthermore, the investigated variations in controller sleep time produced no significant deterioration in the overall system response, indicating that the proposed architecture can maintain effective AGC performance under the tested operating conditions.
Zitieren
APA
Al-Manfi, A. A. (2026). Design and Implement Low Cost PC-Based Educational Platform for Power Generation Control System. International Journal of Scientific Research in Science, Engineering and Technology, 13(4), 347-359. https://doi.org/10.32628/ijsrset26134130
Vancouver
Al-Manfi AA. Design and Implement Low Cost PC-Based Educational Platform for Power Generation Control System. International Journal of Scientific Research in Science, Engineering and Technology. 2026;13(4):347-359. doi:10.32628/ijsrset26134130
BibTeX
@article{AlManfi2026,
author = {Al-Manfi, Abdullah A.},
title = {Design and Implement Low Cost PC-Based Educational Platform for Power Generation Control System},
journal = {International Journal of Scientific Research in Science, Engineering and Technology},
year = {2026},
volume = {13},
number = {4},
pages = {347--359},
doi = {10.32628/ijsrset26134130}
}
EUVIMED