EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of Factors Affecting the Drying Time of Sheet-Fed Offset Printing Inks

Duong Hong Quyen

International Journal of Scientific Research in Science, Engineering and Technology · 20.06.2026 · 13 (3) · 531-539

DOI: 10.32628/ijsrset2613368 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Scientific Research in Science, Engineering and Technology, online erschienen am 20.06.2026. Verfasst von Duong Hong Quyen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This experimental study was conducted to investigate the curing kinetics of sheet-fed offset ink films, examining the effects of ink formulation, ink mileage, and substrate characteristics. Experiments were carried out using a specialized printability tester, the IGT Orange Proofer, under standard environmental conditions (27 °C, 75% RH). The drying time of the ink film was indirectly determined based on the saturation state of the reflection optical density (D) of a flat substrate after being subjected to mechanical rubbing. The results indicate that in the absence of a fountain solution, all three investigated ink series (Vivid, Azo, and Nippon Speed) achieved a drying time of 5.5 hours. This is faster than under actual production conditions due to the absence of ink-water emulsification in the experiment, which would otherwise hinder oxygen diffusion. The ink mileage exhibited a non-linear correlation with the drying rate. When the ink film weight increased from 0.087 g/m2 to 0.091 g/m2, the drying time rose sharply from 5.5 to 11.0 hours. This phenomenon occurs because the saturated paper capillaries lose their absorption capacity, and the early curing of the surface polymer layer blocks the oxygen diffusion pathway. Regarding the substrate materials, the drying rate was directly proportional to the roughness and porosity of the paper, as the printing ink is drawn into the fibrous structure by capillary action rather than being retained on the surface.

Zitieren

APA

Quyen, D. H. (2026). Experimental Investigation of Factors Affecting the Drying Time of Sheet-Fed Offset Printing Inks. International Journal of Scientific Research in Science, Engineering and Technology, 13(3), 531-539. https://doi.org/10.32628/ijsrset2613368

Vancouver

Quyen DH. Experimental Investigation of Factors Affecting the Drying Time of Sheet-Fed Offset Printing Inks. International Journal of Scientific Research in Science, Engineering and Technology. 2026;13(3):531-539. doi:10.32628/ijsrset2613368

BibTeX
@article{Quyen2026,
  author = {Quyen, Duong Hong},
  title = {Experimental Investigation of Factors Affecting the Drying Time of Sheet-Fed Offset Printing Inks},
  journal = {International Journal of Scientific Research in Science, Engineering and Technology},
  year = {2026},
  volume = {13},
  number = {3},
  pages = {531--539},
  doi = {10.32628/ijsrset2613368}
}
Kostenlos starten →