EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancement of Ductility in Circular Compression Members through Improved Confinement Techniques

Narendra Suryavanshi, Dr. Umesh Pendharkar

International Journal of Scientific Research in Civil Engineering · 20.04.2026 · 10 (2) · 170-175

DOI: 10.32628/ijsrce2610222 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Scientific Research in Civil Engineering, online erschienen am 20.04.2026. Verfasst von Narendra Suryavanshi und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional transverse reinforcement in reinforced cement concrete (RCC) columns, typically provided through steel ties, often does not ensure adequate confinement, thereby limiting the ductility and load-carrying capacity of compression members. To address this limitation, various advanced confinement materials, such as fiber-reinforced polymers (FRP) and welded wire fabric (WWF), have been explored in both experimental and theoretical studies to enhance structural performance. In this study, welded wire mesh (WWM) is investigated as an effective confinement material to improve the behavior of circular RCC columns under axial compression. The primary objective is to evaluate the influence of enhanced confinement on the strength and ductility characteristics of compression members. For this purpose, a series of circular column specimens were cast and categorized into two groups: (i) columns reinforced with conventional steel ties, and (ii) columns with additional confinement provided by welded wire mesh. All specimens were subjected to axial compression testing, and their performance was assessed in terms of ultimate load capacity, axial displacement, and failure characteristics. The experimental results indicate that the incorporation of WWM significantly enhances confinement effectiveness, resulting in improved load-bearing capacity and increased ductility compared to conventionally reinforced columns. The findings of this study demonstrate that welded wire mesh is a practical and efficient technique for enhancing the structural performance of circular RCC compression members through improved confinement.

Zitieren

APA

Suryavanshi, N., & Pendharkar, D. U. (2026). Enhancement of Ductility in Circular Compression Members through Improved Confinement Techniques. International Journal of Scientific Research in Civil Engineering, 10(2), 170-175. https://doi.org/10.32628/ijsrce2610222

Vancouver

Suryavanshi N, Pendharkar DU. Enhancement of Ductility in Circular Compression Members through Improved Confinement Techniques. International Journal of Scientific Research in Civil Engineering. 2026;10(2):170-175. doi:10.32628/ijsrce2610222

BibTeX
@article{Suryavanshi2026,
  author = {Suryavanshi, Narendra and Pendharkar, Dr. Umesh},
  title = {Enhancement of Ductility in Circular Compression Members through Improved Confinement Techniques},
  journal = {International Journal of Scientific Research in Civil Engineering},
  year = {2026},
  volume = {10},
  number = {2},
  pages = {170--175},
  doi = {10.32628/ijsrce2610222}
}
Kostenlos starten →