EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Behavior of Circular Columns Confined with Welded Wire Mesh: An Experimental Study on Strength and Axial Displacement

Narendra Suryavanshi, Dr. Umesh Pendharkar

International Journal of Scientific Research in Civil Engineering · 20.04.2026 · 10 (2) · 148-156

DOI: 10.32628/ijsrce2610220 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Scientific Research in Civil Engineering, online erschienen am 20.04.2026. Verfasst von Narendra Suryavanshi und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional transverse reinforcement in reinforced cement concrete (RCC) columns, typically in the form of steel ties, often provides limited confinement efficiency, thereby restricting the achievable ductility and load-carrying capacity of structural members. In recent years, various confinement techniques and materials, such as welded wire fabric (WWF) and fiber-reinforced polymers (FRP), have been investigated to enhance the mechanical performance of concrete columns. Among these, welded wire mesh (WWM) presents a promising alternative due to its uniform distribution, ease of application, and effective confinement characteristics. This study experimentally investigates the influence of WWM confinement on the strength and axial deformation behavior of circular RCC columns subjected to axial compression. The primary objective is to evaluate the enhancement in load-bearing capacity and ductility resulting from improved confinement. A series of column specimens were cast and divided into two groups: (i) conventionally reinforced columns with standard steel ties, and (ii) columns additionally confined using welded wire mesh. All specimens were tested under axial loading, and their performance was assessed in terms of ultimate load capacity, axial displacement, and failure modes. The results demonstrate that the inclusion of WWM significantly improves confinement effectiveness, leading to increased strength and enhanced ductility compared to conventional reinforcement. The study highlights the potential of WWM as a practical and efficient technique for improving the structural performance of circular RCC columns.

Zitieren

APA

Suryavanshi, N., & Pendharkar, D. U. (2026). Behavior of Circular Columns Confined with Welded Wire Mesh: An Experimental Study on Strength and Axial Displacement. International Journal of Scientific Research in Civil Engineering, 10(2), 148-156. https://doi.org/10.32628/ijsrce2610220

Vancouver

Suryavanshi N, Pendharkar DU. Behavior of Circular Columns Confined with Welded Wire Mesh: An Experimental Study on Strength and Axial Displacement. International Journal of Scientific Research in Civil Engineering. 2026;10(2):148-156. doi:10.32628/ijsrce2610220

BibTeX
@article{Suryavanshi2026,
  author = {Suryavanshi, Narendra and Pendharkar, Dr. Umesh},
  title = {Behavior of Circular Columns Confined with Welded Wire Mesh: An Experimental Study on Strength and Axial Displacement},
  journal = {International Journal of Scientific Research in Civil Engineering},
  year = {2026},
  volume = {10},
  number = {2},
  pages = {148--156},
  doi = {10.32628/ijsrce2610220}
}
Kostenlos starten →