EUVIMEDEUVIMED entdecken
Crossref

Effect of Drying Methods on the Morphology and Electrochemical Properties of Cellulose Gel Polymer Electrolytes for Lithium-Ion Batteries

Jiling Song, Hua Wang, Jianbing Guo, Minghua Lin, Bin Zheng, Jiqiang Wu

Journal of Polymer Materials · 2025 · 42 (4) · 1143-1157

DOI: 10.32604/jpm.2025.073414 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polymer Materials, 2025. Verfasst von Jiling Song und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

: The pursuit of safer energy storage systems is driving the development of advanced electrolytes for lithium-ion batteries. Traditional liquid electrolytes pose flammability risks, while solid-state alternatives often suffer from low ionic conductivity. Gel polymer electrolytes (GPEs) emerge as a promising compromise, combining the safety of solids with the ionic conductivity of liquids. Cellulose, an abundant and eco-friendly polymer, presents an ideal base material for sustainable GPEs due to its biocompatibility and mechanical strength. This study systematically investigates how drying methods affect cellulose-based GPEs. Cellulose hydrogels were synthesized through dissolution-crosslinking and processed using vacuum drying (VD), supercritical drying (SCD), and freeze-drying (FD). VD and SCD produced dense membranes with excellent mechanical strength (7.2 MPa) but limited electrolyte uptake (30%–40%). In contrast, FD created a highly porous structure (21.13% porosity) with remarkable electrolyte absorption (638%), leading to superior ionic conductivity (1.22 mS ⋅ cm − 1 ) and lithium-ion transference number (0.28). However, this came at the cost of increased interfacial impedance and poor rate capability, resulting in 81.24% capacity retention after 100 cycles. These findings illuminate the critical balance between electrochemical performance and mechanical properties in cellulose GPEs, providing valuable insights for designing sustainable electrolytes for flexible electronics and electric vehicles.

Zitieren

APA

Song, J., Wang, H., Guo, J., Lin, M., Zheng, B., & Wu, J. (2025). Effect of Drying Methods on the Morphology and Electrochemical Properties of Cellulose Gel Polymer Electrolytes for Lithium-Ion Batteries. Journal of Polymer Materials, 42(4), 1143-1157. https://doi.org/10.32604/jpm.2025.073414

Vancouver

Song J, Wang H, Guo J, Lin M, Zheng B, Wu J. Effect of Drying Methods on the Morphology and Electrochemical Properties of Cellulose Gel Polymer Electrolytes for Lithium-Ion Batteries. Journal of Polymer Materials. 2025;42(4):1143-1157. doi:10.32604/jpm.2025.073414

BibTeX
@article{Song2025,
  author = {Song, Jiling and Wang, Hua and Guo, Jianbing and Lin, Minghua and Zheng, Bin and Wu, Jiqiang},
  title = {Effect of Drying Methods on the Morphology and Electrochemical Properties of Cellulose Gel Polymer Electrolytes for Lithium-Ion Batteries},
  journal = {Journal of Polymer Materials},
  year = {2025},
  volume = {42},
  number = {4},
  pages = {1143--1157},
  doi = {10.32604/jpm.2025.073414}
}
Kostenlos starten →