EUVIMEDEUVIMED entdecken
Crossref

Properties of Bi2O2S Thin Films Produced by Chemical Bath Deposition at Different Immersion Bath Numbers

Edgar G. Zamorano-Noriega, María E. Martínez-Barbosa, María L. Mota, Ana B. López-Oyama, Eugenio Rodríguez González, Crescencio García-Guendulain, Ramón Ochoa-Landín, Fernando J. Sánchez-Rodríguez, Santos J. Castillo

Chalcogenide Letters · 2026 · 23 (6) · 1-10

DOI: 10.32604/cl.2026.085590 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chalcogenide Letters, 2026. Verfasst von Edgar G. Zamorano-Noriega und 8 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

: The major challenge in developing efficient photovoltaic devices is achieving highlight absorption, optimal charge transport, and low recombination losses. In this work, the effect of the immersion bath numbers in the chemical bath deposition (CBD) technique on the properties of bismuth oxysulfide (Bi 2 O 2 S) thin films, as emergent materials, was studied. The films were synthesized under eco-friendly conditions, using a low-concentration bismuth nitrate precursor and thioacetamide as the sulfur source, and under basic conditions at moderate temperature, with a reaction time of 3 h. X-ray diffraction demonstrated the formation of a crystalline Bi 2 O 2 S phase, and the morphological analysis showed a uniform film coverage with flower-like morphology, indicating anisotropic growth. XPS verified the coexistence of bismuth, oxygen, and sulfur, confirming the formation of the oxysulfide compound. Results demonstrated that absorbance increased as the number of immersion bath numbers increased. Indeed, structural analysis established that the number of immersion baths critically influences crystallite size, interlayer spacing, and crystallinity of Bi 2 O 2 S nanosheets. Finally, a formation mechanism is proposed for these Bi 2 O 2 S thin films for the one, two-, and three-immersion bath. This study demonstrates that CBD processing parameters critically influence film quality and phase purity, offering an effective and low-cost route to produce Bi-based thin films with potential applications in photovoltaic devices.

Zitieren

APA

Zamorano-Noriega, E. G., Martínez-Barbosa, M. E., Mota, M. L., López-Oyama, A. B., González, E. R., García-Guendulain, C., Ochoa-Landín, R., Sánchez-Rodríguez, F. J., & Castillo, S. J. (2026). Properties of Bi2O2S Thin Films Produced by Chemical Bath Deposition at Different Immersion Bath Numbers. Chalcogenide Letters, 23(6), 1-10. https://doi.org/10.32604/cl.2026.085590

Vancouver

Zamorano-Noriega EG, Martínez-Barbosa ME, Mota ML, López-Oyama AB, González ER, García-Guendulain C, et al. Properties of Bi2O2S Thin Films Produced by Chemical Bath Deposition at Different Immersion Bath Numbers. Chalcogenide Letters. 2026;23(6):1-10. doi:10.32604/cl.2026.085590

BibTeX
@article{ZamoranoNoriega2026,
  author = {Zamorano-Noriega, Edgar G. and Martínez-Barbosa, María E. and Mota, María L. and López-Oyama, Ana B. and González, Eugenio Rodríguez and García-Guendulain, Crescencio and Ochoa-Landín, Ramón and Sánchez-Rodríguez, Fernando J. and Castillo, Santos J.},
  title = {Properties of Bi2O2S Thin Films Produced by Chemical Bath Deposition at Different Immersion Bath Numbers},
  journal = {Chalcogenide Letters},
  year = {2026},
  volume = {23},
  number = {6},
  pages = {1--10},
  doi = {10.32604/cl.2026.085590}
}
Kostenlos starten →