EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

PENURUNAN PRODUK CACAT PADA KEMASAN MINYAK CO FORTUNE 1 LITER DENGAN METODE STATISTICAL PROCESS CONTROL (SPC) (Studi Kasus: PT. Sinar Alam Permai)

Albertus Alfon Yumando, Yohanes Dicka Pratama

SAINTEK : Jurnal Ilmiah Sains dan Teknologi Industri · 06.12.2024 · 7 (2) · 33-42

DOI: 10.32524/saintek.v7i2.1278 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SAINTEK : Jurnal Ilmiah Sains dan Teknologi Industri, online erschienen am 06.12.2024. Verfasst von Albertus Alfon Yumando und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Product packaging is one of the important elements in the distribution or delivery of products to consumers. The packaging process starting from the machine, the materials used for packaging to the human resource factor must be considered and controlled properly so that the risk of possible product defects is small. The consumer pack department, PT Sinar Alam Permai is able to produce 25,000 pcs of co fortune 1 liter oil products every day which are ready to be distributed to consumers. Although the packaging process has been carried out with automatic machines and has obtained a quality management certificate, there are still many products that do not comply with company standards or commonly referred to as defective products. From the data obtained, the number of defective products per day can reach ± 700 pcs or about 2.8% of the production capacity per day. This research uses the Statistical Process Control method as well as the tools of check sheet, C-chart, Pareto diagram, and Ishikawa diagram to help quality control reduce the number of defective products of Co Fortune 1 liter oil. Before the improvement, the average number of defective products was 690 pcs per day and after the implementation of the improvement, the average number of defective products was 472 pcs per day.

Zitieren

APA

Yumando, A. A., & Pratama, Y. D. (2024). PENURUNAN PRODUK CACAT PADA KEMASAN MINYAK CO FORTUNE 1 LITER DENGAN METODE STATISTICAL PROCESS CONTROL (SPC) (Studi Kasus: PT. Sinar Alam Permai). SAINTEK : Jurnal Ilmiah Sains dan Teknologi Industri, 7(2), 33-42. https://doi.org/10.32524/saintek.v7i2.1278

Vancouver

Yumando AA, Pratama YD. PENURUNAN PRODUK CACAT PADA KEMASAN MINYAK CO FORTUNE 1 LITER DENGAN METODE STATISTICAL PROCESS CONTROL (SPC) (Studi Kasus: PT. Sinar Alam Permai). SAINTEK : Jurnal Ilmiah Sains dan Teknologi Industri. 2024;7(2):33-42. doi:10.32524/saintek.v7i2.1278

BibTeX
@article{Yumando2024,
  author = {Yumando, Albertus Alfon and Pratama, Yohanes Dicka},
  title = {PENURUNAN PRODUK CACAT PADA KEMASAN MINYAK CO FORTUNE 1 LITER DENGAN METODE STATISTICAL PROCESS CONTROL (SPC) (Studi Kasus: PT. Sinar Alam Permai)},
  journal = {SAINTEK : Jurnal Ilmiah Sains dan Teknologi Industri},
  year = {2024},
  volume = {7},
  number = {2},
  pages = {33--42},
  doi = {10.32524/saintek.v7i2.1278}
}
Kostenlos starten →