Thermal oxidation of carbon monoxide in air using various self-prepared catalysts
Science & Technology Development Journal - Engineering and Technology · 07.07.2020 · 2 (SI2) · First
DOI: 10.32508/stdjet.v2isi2.469 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science & Technology Development Journal - Engineering and Technology, online erschienen am 07.07.2020. Verfasst von Nguyen Nhat Huy und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Carbon monoxide (CO) is a very toxic pollutant emitted from wood fired boiler, which is widely used in small and medium enterprises in Vietnam. The treatment of CO containing flue gas faces many difficulties due to the inert property of CO and cannot be removed by traditional adsorption and absorption methods and one of the effective CO treatments is catalytic oxidation. Therefore, we aimed to prepare various catalysts on different carriers for treatment of CO in flue gas, including γ-Al2O3-based metal oxides (Co3O4/Al2O3, Cr2O3/Al2O3, and CuO/Al2O3), CuO–MnOx/OMS-2, and CuO-MnOx/zeolite. The CO removal tests were conducted in a continuous fixed bed reactor in laboratory scale with temperature range of 50 – 550 oC. The characteristics of catalytic materials were then determined by various methods such as Brunauer-Emmett-Teller measurement, X-ray diffraction, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. Results showed that CuO-MnOx/OMS-2 was the best catalyst with high removal efficiency of 98.41% at reactor temperature of 250 oC while gas outlet temperature of < 50 oC, proving the suitability of this material for practical treatment of CO in flue gas. The reaction follows Mars-Van-Krevelen mechanism with the presence of Cu2+-O2--Mn4+ ↔ Cu+-o-Mn3+ + O2 redox in the structure of the material. Moreover, the effect of environmental factors such as flow rate, inlet CO concentration, and catalysts amount on the CO removal efficiency were investigated and noted for designing and operation purposes. Concentration of outlet CO met well QCVN 19: 2009/BTNMT - National technical regulation on industrial emissions for dust and inorganic substances. Therefore, CuO-MnOx/OMS-2 catalyst material could be a potential catalyst for treatment of CO in flue gas of boiler.
Zitieren
APA
Huy, N. N., & Thị, B. T. N. (2020). Thermal oxidation of carbon monoxide in air using various self-prepared catalysts. Science & Technology Development Journal - Engineering and Technology, 2(SI2), First. https://doi.org/10.32508/stdjet.v2isi2.469
Vancouver
Huy NN, Thị BTN. Thermal oxidation of carbon monoxide in air using various self-prepared catalysts. Science & Technology Development Journal - Engineering and Technology. 2020;2(SI2):First. doi:10.32508/stdjet.v2isi2.469
BibTeX
@article{Huy2020,
author = {Huy, Nguyen Nhat and Thị, Bích Thảo Nguyễn},
title = {Thermal oxidation of carbon monoxide in air using various self-prepared catalysts},
journal = {Science & Technology Development Journal - Engineering and Technology},
year = {2020},
volume = {2},
number = {SI2},
pages = {First},
doi = {10.32508/stdjet.v2isi2.469}
}
EUVIMED