Using SPT Blow Count to Estimate Shear Wave Velocity For ASCE 7-22 Site Classification: A Cautionary Tale
Journal of Environmental and Engineering Geophysics · 01.03.2025 · 30 (1) · 19-24
DOI: 10.32389/jeeg24-026 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Environmental and Engineering Geophysics, online erschienen am 06.07.2026. Verfasst von Michael E. Kalinski. Die Arbeit nennt 16 Literaturangaben.
Abstract (Originalsprache)
The ASCE 7 standard has recently been revised to allow practitioners to develop site response spectra that are more representative of response spectra derived from strong ground motion shaking. The new ASCE 7-22 standard requires that site class must be determined using directly measured shear wave velocity (υs) data or by applying an approach where another parameter or method is used to estimate υs. The acquisition of υs data is often impeded by budget constraints and the availability of expertise to properly acquire and analyze the data. Many researchers have developed correlations between the more common standard penetration test blow count (N60) and υs, but there is typically a large amount of variability in these relationships, which demonstrates that caution is warranted when using such an approach to determine seismic site class per ASCE 7-22. Herein, the relationship between N60 and vs is investigated using a dataset acquired from various sites in California. Soil type was considered and probabilistic analyses of the dataset were performed. As a result of this study, curves quantifying the probability of estimating υs and seismic site class for a given N60 were developed. The data demonstrate that estimates for υs and seismic site class can vary widely when using an N60-based approach and this variability can be quantified in a probabilistic sense. This research is specific to a dataset acquired in California but the approach can be applied to other datasets to aid engineers in making risk-based decisions for seismic design using N60 data.
Zitieren
APA
Kalinski, M. E. (2025). Using SPT Blow Count to Estimate Shear Wave Velocity For ASCE 7-22 Site Classification: A Cautionary Tale. Journal of Environmental and Engineering Geophysics, 30(1), 19-24. https://doi.org/10.32389/jeeg24-026
Vancouver
Kalinski ME. Using SPT Blow Count to Estimate Shear Wave Velocity For ASCE 7-22 Site Classification: A Cautionary Tale. Journal of Environmental and Engineering Geophysics. 2025;30(1):19-24. doi:10.32389/jeeg24-026
BibTeX
@article{Kalinski2025,
author = {Kalinski, Michael E.},
title = {Using SPT Blow Count to Estimate Shear Wave Velocity For ASCE 7-22 Site Classification: A Cautionary Tale},
journal = {Journal of Environmental and Engineering Geophysics},
year = {2025},
volume = {30},
number = {1},
pages = {19--24},
doi = {10.32389/jeeg24-026}
}
EUVIMED