Experimental and theoretical investigation of aortic wall tissue in tensile tests
Technology and Health Care · 2023
DOI: 10.3233/thc-235007 ↗Kurz gefasst
Fachartikel in der Zeitschrift Technology and Health Care, 2023. Verfasst von Aleksandra Petuchova und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomechanical Engineering, Faculty of Mechanics, Vilnius Gediminas Technical University, Vilnius, Lithuania. Hauptthemen laut MEDLINE: Aorta. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 24 Literaturangaben.
Abstract (Originalsprache)
BACKGROUND: Understanding the mechanical properties of aortic tissue is essential for developing numerical computation tools and assessing the risk of aortic aneurysm fractures. Tensile tests using aortic wall specimens allow for the determination of stress and strain depending on the location and direction of the sample. OBJECTIVE: The aim of this study was to perform a mechanical tensile test using canine aorta samples and create a numerical model of aortic tissue tension from the processed data. METHODS: Dogbone-shaped samples were dissected from canine aortic segments. The initial measurements were made at zero tension and the tensile tests were conducted at 10 mm/min until rupture. Force and stretch data were used to obtain engineering and true stress-strain curves. The true stress-strain curves were taken until the maximum strength was obtained, after which they were smoothed and fitted using a logistic function with three coefficients. These curves were then used as material mechanical properties for a numerical model of the aortic tissue tension. A simplified rectangle form was used to mimic the middle of the dogbone-shaped portion of the tissue specimen. Experimental displacement data were collected for the boundary conditions of the finite element 3D model. RESULTS: The experimental data processing revealed that the logistic function described the nonlinear behaviour of the aorta soft tissue with an accuracy of 95% from the start of the tension to the media layer rupture. By applying numerical simulations, we obtained a correspondence of the load curve with an RMSE = 0.069 for the theoretical and experimental external tension data. CONCLUSION: The numerical investigation confirmed that the non-linear soft tissue was validated by applying a logistic function approach to the mechanical properties of the aortic wall.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomechanical Engineering, Faculty of Mechanics, Vilnius Gediminas Technical University, Vilnius, Lithuania.
- Laboratory of Numerical Simulation, Institute of Mechanics, Faculty of Mechanics, Vilnius Gediminas Technical University, Vilnius, Lithuania.
- Veterinary Department, Faculty of Agrotechnology, Vilnius College, Vilnius, Lithuania.
- Department of Mechatronics, Robotics and Digital Manufacturing, Vilnius Gediminas Technical University, Vilnius, Lithuania.
Zitieren
APA
Petuchova, A., Maknickas, A., Kostenko, E., & Stonkus, R. (2023). Experimental and theoretical investigation of aortic wall tissue in tensile tests. Technology and Health Care. https://doi.org/10.3233/thc-235007
Vancouver
Petuchova A, Maknickas A, Kostenko E, Stonkus R. Experimental and theoretical investigation of aortic wall tissue in tensile tests. Technology and Health Care. 2023. doi:10.3233/thc-235007
BibTeX
@article{Petuchova2023,
author = {Petuchova, Aleksandra and Maknickas, Algirdas and Kostenko, Ernest and Stonkus, Rimantas},
title = {Experimental and theoretical investigation of aortic wall tissue in tensile tests},
journal = {Technology and Health Care},
year = {2023},
doi = {10.3233/thc-235007}
}
EUVIMED