EUVIMEDEUVIMED entdecken
Crossref

Design, fabrication and experiments of a hydraulic active-passive hybrid prosthesis knee

Zhennan Li, Chunbao Liu, Yang Han, Tongjian Wang, Ren Lei

Technology and Health Care · 30.06.2023 · 31 (4) · 1267-1277

DOI: 10.3233/thc-220522 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Technology and Health Care, erschienen am 30.06.2023. Verfasst von Zhennan Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Aerospace Engineering, Jilin University, Changchun, Jilin, China. Hauptthemen laut MEDLINE: Knee Prosthesis, Artificial Limbs. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 27 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BACKGROUND: Due to low friction, passive mechanical prostheses move compliantly followed by the stump and are used widely. Advanced semi-active prostheses can both move passively like passive prostheses and provide active torque under specific conditions. However, the current mechanical-hydraulic coupling driven semi-active prostheses, in order to meet the low passive friction requirements with a low active transmission ratio, lead to a significant problem of insufficient active torque. OBJECTIVE: A hybrid active and passive prosthesis was developed to solve the incompatibility problem of low passive friction and high active driving torque of semi-active prostheses. METHODS: The mechanical structure and control strategy of the prosthesis were demonstrated. The performance of the prosthesis was tested by bench and human tests. RESULTS: Passive subsystem damping adjustment ranges from 0.4 N⋅(mm/s)-1 to 300 N⋅(mm/s)-1. The switching time between the damping and the active subsystem is 32 ± 2 ms. The continuous active torque output is more than 24 Nm. In level walking, the peak torque is about 28 Nm. CONCLUSION: The proposed active-passive hybrid hydraulic prosthesis could satisfy both low passive friction and high active actuation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Knee ProsthesisArtificial LimbsHumansProsthesis DesignWalkingAmputation StumpsBiomechanical Phenomena

Stichwörter der Autor:innen

Knee prosthesisactive-passive hybrid drivehigh transmission ratiohydrauliclow passive friction

Autor:innen und Institutionen

  • School of Mechanical and Aerospace Engineering, Jilin University, Changchun, Jilin, China.
  • Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun, Jilin, China.
  • School of Mechanical, Aerospace and Civil Engineering, University of Manchester, Manchester, UK.

Zitieren

APA

Li, Z., Liu, C., Han, Y., Wang, T., & Lei, R. (2023). Design, fabrication and experiments of a hydraulic active-passive hybrid prosthesis knee. Technology and Health Care, 31(4), 1267-1277. https://doi.org/10.3233/thc-220522

Vancouver

Li Z, Liu C, Han Y, Wang T, Lei R. Design, fabrication and experiments of a hydraulic active-passive hybrid prosthesis knee. Technology and Health Care. 2023;31(4):1267-1277. doi:10.3233/thc-220522

BibTeX
@article{Li2023,
  author = {Li, Zhennan and Liu, Chunbao and Han, Yang and Wang, Tongjian and Lei, Ren},
  title = {Design, fabrication and experiments of a hydraulic active-passive hybrid prosthesis knee},
  journal = {Technology and Health Care},
  year = {2023},
  volume = {31},
  number = {4},
  pages = {1267--1277},
  doi = {10.3233/thc-220522}
}
Kostenlos starten →