EUVIMEDEUVIMED entdecken
Crossref

INVESTİGATİON OF THE PROPERTİES OF ACTİVATED CARBON OBTAİNED FROM WALNUT SHELLS

Kristina GORYUNOVA, Nahida JAFAROVA, Narmin Bayramova

PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions · 01.07.2026 · 13

DOI: 10.32010/qadr5504 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions, online erschienen am 01.07.2026. Verfasst von Kristina GORYUNOVA und 2 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The synthesis of a relatively low-cost adsorbent using plant-based waste materials for the removal of pollutants from water. For this purpose, activated carbon suitable for use as an adsorbent was prepared from walnut shell waste using a chemical activation method. Research Method: The carbonization process was carried out in a muffle furnace at 450 °C for 3 hours. Phosphoric acid (H₃PO₄) and a 1N sodium hydroxide (NaOH) solution were used as activating agents at a 1:1 mass ratio. In order to determine the properties of the obtained activated carbon, iodine number and surface area determination analyses based on methylene blue adsorption were performed on the prepared samples. The surface morphology and elemental composition of the carbon were examined using Scanning Electron Microscopy (SEM), while the presence of functional groups was identified by Fourier Transform Infrared Spectroscopy (FTIR). The adsorbent was used for the adsorption of organic pollutants such as oil and dye substances. Adsorption experiments were conducted for 48 hours at a temperature of 296 K under different pH values and initial pollutant concentrations. Results of the Study: Based on the determination of the iodine number, it was established that the activated carbon obtained from walnut shell powder possesses predominantly a microporous structure, although it also contains partially mesoporous pores. Elemental composition analysis of the samples revealed that the structure mainly consists of O, C, P, Na, Si, Ca, Sb, and K elements, along with trace amounts of Fe. The SEM image magnified to 800 µm confirmed that the adsorbent has a porous structure, while infrared (IR) spectra clearly verified the presence of oxygen-containing functional groups such as hydroxyl, carbonyl, and carboxyl groups on the surface of the prepared activated carbon. As a result of the conducted research, chemically modified activated carbon samples were successfully obtained from walnut shells. The determination of the physicochemical properties of the samples showed that the modification process had a significant effect on the pH value and adsorption capacity of the adsorbents. The iodine number results confirmed that the samples possess a well-developed pore structure and high adsorption capacity.

Zitieren

APA

GORYUNOVA, K., JAFAROVA, N., & Bayramova, N. (2026). INVESTİGATİON OF THE PROPERTİES OF ACTİVATED CARBON OBTAİNED FROM WALNUT SHELLS. PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions, 13. https://doi.org/10.32010/qadr5504

Vancouver

GORYUNOVA K, JAFAROVA N, Bayramova N. INVESTİGATİON OF THE PROPERTİES OF ACTİVATED CARBON OBTAİNED FROM WALNUT SHELLS. PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions. 2026:13. doi:10.32010/qadr5504

BibTeX
@article{GORYUNOVA2026,
  author = {GORYUNOVA, Kristina and JAFAROVA, Nahida and Bayramova, Narmin},
  title = {INVESTİGATİON OF THE PROPERTİES OF ACTİVATED CARBON OBTAİNED FROM WALNUT SHELLS},
  journal = {PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions},
  year = {2026},
  pages = {13},
  doi = {10.32010/qadr5504}
}
Kostenlos starten →