EUVIMEDEUVIMED entdecken
Crossref

Pengembangan Desain dan Fabrikasi Mesin Pencacah Es Balok

Rahmat PS, Mu'tasim, Abdul Salam, Uswatul Hasanah Mihdar

Jurnal Teknik Mesin Sinergi · 03.04.2026 · 24 (1) · 13-19

DOI: 10.31963/sinergi.v24i1.5867 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknik Mesin Sinergi, online erschienen am 03.04.2026. Verfasst von Rahmat PS und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Based on observations conducted at several fish auction sites and fish vendors around fish markets, it was found that these locations require approximately 40 blocks of ice per day for fish preservation. Several limitations of the existing block ice crushing machines include the high workload required to insert ice blocks into the machine inlet and the production of only one type of crushed ice, namely a mixture of fine and coarse fragments. This applied design research aims to develop a block ice crushing machine capable of producing two types of crushed ice, namely fine and coarse fragments with more uniform particle sizes, and to evaluate the machine performance based on rotational speed variations in terms of crushed ice quality and production capacity. The research methodology consisted of several stages, including designing the machine structure with a foldable inlet channel, detachable crushing rods on the crushing drum, and a more practical construction design. The subsequent stages involved machine fabrication, machine performance testing at various rotational speeds, and the calculation of manufacturing costs. The results show that the best performance for fine ice crushing was achieved at a machine speed of 1100 rpm with particle sizes ranging from 0.5–2 cm, while coarse crushing was optimal at 900 rpm with particle sizes ranging from 5–8 cm. The manufacturing cost for producing this block ice crushing machine was Rp 5,253,438.

Zitieren

APA

PS, R., Mu'tasim, Salam, A., & Mihdar, U. H. (2026). Pengembangan Desain dan Fabrikasi Mesin Pencacah Es Balok. Jurnal Teknik Mesin Sinergi, 24(1), 13-19. https://doi.org/10.31963/sinergi.v24i1.5867

Vancouver

PS R, Mu'tasim, Salam A, Mihdar UH. Pengembangan Desain dan Fabrikasi Mesin Pencacah Es Balok. Jurnal Teknik Mesin Sinergi. 2026;24(1):13-19. doi:10.31963/sinergi.v24i1.5867

BibTeX
@article{PS2026,
  author = {PS, Rahmat and Mu'tasim and Salam, Abdul and Mihdar, Uswatul Hasanah},
  title = {Pengembangan Desain dan Fabrikasi Mesin Pencacah Es Balok},
  journal = {Jurnal Teknik Mesin Sinergi},
  year = {2026},
  volume = {24},
  number = {1},
  pages = {13--19},
  doi = {10.31963/sinergi.v24i1.5867}
}
Kostenlos starten →