EUVIMEDEUVIMED entdecken
Crossref

OPTIMALISASI PENGECATAN MENGGUNAKAN MODEL WATER TRANSFER PRINTING PADA LOGAM

Roni Suhartono, Susilawati Susilawati

Jurnal Ilmiah Ilmu dan Teknologi Rekayasa · 2020

DOI: 10.31962/jiitr.v1i2.32 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Ilmiah Ilmu dan Teknologi Rekayasa, 2020. Verfasst von Roni Suhartono und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Painting the water transfer printing model on metal is the job of covering the surface of a metal object using water as the medium. The problem that often occurs is that the film does not want to stick on the surface to be painted. This is mostly due to things like the slope of an object, the condition of the water, and even the time needed. To solve these problems it is necessary to use a structured and patterned painting method. The research that has been done produces the right work steps to maximize the painting results using a water transfer printing model. The important point to do in painting using this model is the room that is not windy, the need for primers before painting, the slope of the water condition must be clean and calm and the temperature is around 32̊, the condition of the film is clean, the activation time of the film is about 60 seconds and the angle of the object when dipped 40-50̊. This important point makes painting using the water transfer printing model more optimal. Keywords: Metal, Optimization, Water Transfer Printing

Zitieren

APA

Suhartono, R., & Susilawati, S. (2020). OPTIMALISASI PENGECATAN MENGGUNAKAN MODEL WATER TRANSFER PRINTING PADA LOGAM. Jurnal Ilmiah Ilmu dan Teknologi Rekayasa. https://doi.org/10.31962/jiitr.v1i2.32

Vancouver

Suhartono R, Susilawati S. OPTIMALISASI PENGECATAN MENGGUNAKAN MODEL WATER TRANSFER PRINTING PADA LOGAM. Jurnal Ilmiah Ilmu dan Teknologi Rekayasa. 2020. doi:10.31962/jiitr.v1i2.32

BibTeX
@article{Suhartono2020,
  author = {Suhartono, Roni and Susilawati, Susilawati},
  title = {OPTIMALISASI PENGECATAN MENGGUNAKAN MODEL WATER TRANSFER PRINTING PADA LOGAM},
  journal = {Jurnal Ilmiah Ilmu dan Teknologi Rekayasa},
  year = {2020},
  doi = {10.31962/jiitr.v1i2.32}
}
Kostenlos starten →