Studi Sifat Mekanis Baja Karbon Rendah Akibat Perbedaan Holding Time dalam Proses Pack Carburizing Menggunakan Katalis Cangkang Kerang
Journal Mechanical Engineering · 2025
DOI: 10.31959/jme.v3i3.3873 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal Mechanical Engineering, 2025. Verfasst von Edison Effendy und 1 weiteren Autor:innen.
Abstract (Originalsprache)
This research aims to evaluate the surface hardness improvement of S-35C steel through the pack carburizing process using an eco-friendly catalyst alternative. The use of conventional, toxic Barium Carbonate (BaCO3) is replaced with a bio-energizer derived from marine shell waste, which is rich in natural Calcium Carbonate (CaCO3). The research method utilized was experimental, where steel specimens were completely buried in a media mixture of 60% nani wood charcoal and 40% shell powder. The heating process was conducted at a target temperature of 900°C with holding time variations of 15, 30, and 45 minutes, followed by rapid quenching in SAE 20-50 oil. Hardness testing was performed using a Rockwell (HRC) scale machine. The results indicate that the use of the seashell biocatalyst effectively increased the surface hardness value of the steel. There is a directly proportional relationship between the holding time duration and the hardness improvement. The most optimal hardness value was achieved at a holding time of 45 minutes, showing a net increase of +20.38 units (21.60%) from an initial average of 94.33 units to 114.71 units. A physical deceleration phenomenon in the carbon diffusion rate was also observed as the holding time increased, which strongly aligns with Fick's Second Law of Diffusion. Keyword : pack carburizing, shell waste, hardness, holding time
Zitieren
APA
Effendy, E., & Matahelumual, M. (2025). Studi Sifat Mekanis Baja Karbon Rendah Akibat Perbedaan Holding Time dalam Proses Pack Carburizing Menggunakan Katalis Cangkang Kerang. Journal Mechanical Engineering. https://doi.org/10.31959/jme.v3i3.3873
Vancouver
Effendy E, Matahelumual M. Studi Sifat Mekanis Baja Karbon Rendah Akibat Perbedaan Holding Time dalam Proses Pack Carburizing Menggunakan Katalis Cangkang Kerang. Journal Mechanical Engineering. 2025. doi:10.31959/jme.v3i3.3873
BibTeX
@article{Effendy2025,
author = {Effendy, Edison and Matahelumual, Marselino},
title = {Studi Sifat Mekanis Baja Karbon Rendah Akibat Perbedaan Holding Time dalam Proses Pack Carburizing Menggunakan Katalis Cangkang Kerang},
journal = {Journal Mechanical Engineering},
year = {2025},
doi = {10.31959/jme.v3i3.3873}
}
EUVIMED