EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Uso integral de simulación, diseño de experimentos y KANBAN para evaluar y mejorar el rendimiento de una línea de producción

Sergio Augusto Fernández Henao, Angela Liceth Pérez Rendon, Pedro Daniel Medina Varela

Entre Ciencia e Ingeniería · 2019

DOI: 10.31908/19098367.1147 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Entre Ciencia e Ingeniería, 2019. Verfasst von Sergio Augusto Fernández Henao und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article is the product of research developed in a production line, where we wanted to observe how the Design of Experiments (DOE) and the Kanban interact fully with the Discrete Simulation in order to improve the performance of the production system. The above was achieved by showing how the DOE serves to identify the relevant factors in the production process, to then be incorporated as input parameters in the simulation, and also, through the implementation of the Kanban tool type "Trigger" the performance improvements presented in such production line were evidenced. Based on the above, two simulations were made: One without the use of the Lean tool and another with its implementation. In this way, the improvement in the performance of the production line could be observed when incorporating the Kanban. For example, the "Ironing" process, which had a utilization rate of 36%, increased to 60.39% with the use of Kanban, the same thing happened to the "Weaving" process, which increased its use to 61.77%. In this way, a way to improve the performance of a production line supported in the combination of these three tools is illustrated.

Zitieren

APA

Henao, S. A. F., Rendon, A. L. P., & Varela, P. D. M. (2019). Uso integral de simulación, diseño de experimentos y KANBAN para evaluar y mejorar el rendimiento de una línea de producción. Entre Ciencia e Ingeniería. https://doi.org/10.31908/19098367.1147

Vancouver

Henao SAF, Rendon ALP, Varela PDM. Uso integral de simulación, diseño de experimentos y KANBAN para evaluar y mejorar el rendimiento de una línea de producción. Entre Ciencia e Ingeniería. 2019. doi:10.31908/19098367.1147

BibTeX
@article{Henao2019,
  author = {Henao, Sergio Augusto Fernández and Rendon, Angela Liceth Pérez and Varela, Pedro Daniel Medina},
  title = {Uso integral de simulación, diseño de experimentos y KANBAN para evaluar y mejorar el rendimiento de una línea de producción},
  journal = {Entre Ciencia e Ingeniería},
  year = {2019},
  doi = {10.31908/19098367.1147}
}
Kostenlos starten →