Graphene-Doped Eu₂O₃ thick-film sensor for CO₂ gas detection
Multidisciplinary Science Journal · 22.07.2026 · 9 (1) · 2027109
DOI: 10.31893/multiscience.2027109 ↗Kurz gefasst
Fachartikel in der Zeitschrift Multidisciplinary Science Journal, online erschienen am 22.07.2026. Verfasst von Kuberahventhan Sanmugavelan und 6 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben.
Abstract (Originalsprache)
The demand for precise, rapid, and energy-efficient gas sensors has increased, driving interest in nanomaterial-based systems for room-temperature CO₂ detection. Graphene-doped europium oxide (Eu₂O₃) is investigated here as a thick-film sensing material to overcome the limited sensitivity, slow response, and poor stability of pristine Eu₂O₃ under ambient conditions. Eu₂O₃/graphene thick films with 0–5 wt% graphene were fabricated on Kapton substrates using a screen-printing technique. Their morphology, composition, structure, and crystallinity were characterized by FESEM, EDX, Raman spectroscopy, and XRD. Sensor tests were performed at room temperature in a controlled chamber with CO₂ flow rates of 30, 50, and 70 sccm. Among all compositions, the 2 wt% graphene-doped Eu₂O₃ sensor showed the best performance, with a low resistance of 0.0874 GΩ and sensitivities of 2.40, 2.37, and 2.34 at 30, 50, and 70 sccm CO₂, respectively. Relative to undoped Eu₂O₃, the 2% Eu₂O₃/graphene sensor exhibited a 2.1-fold increase in sensitivity (26.50 pA/sccm), a 4.5-fold improvement in resolution, a 2.2-fold reduction in standard deviation, and excellent linearity (98.04%). Furthermore, the incorporation of graphene significantly enhances the electron mobility and provides additional active sites for gas interaction, which are critical for improving sensing dynamics. The improved repeatability and stability observed over multiple sensing cycles indicate the robustness of the developed sensor under continuous operation. Graphene’s large surface area and high conductivity enhance CO₂ adsorption and charge transfer, thereby promoting carbonate species formation through redox interaction with Eu³⁺. Overall, 2 wt% graphene provides an optimal balance between structural integrity and electrical conductivity, demonstrating that graphene-doped Eu₂O₃ thick films are promising candidates for reliable room-temperature CO₂ gas sensors for environmental and industrial monitoring.
Zitieren
APA
Sanmugavelan, K., Jali, M. H., Fuad, M. A. M., Chachuli, S. A. M., Samat, K. F., Harun, S. W., & Thokchom, S. (2026). Graphene-Doped Eu₂O₃ thick-film sensor for CO₂ gas detection. Multidisciplinary Science Journal, 9(1), 2027109. https://doi.org/10.31893/multiscience.2027109
Vancouver
Sanmugavelan K, Jali MH, Fuad MAM, Chachuli SAM, Samat KF, Harun SW, et al. Graphene-Doped Eu₂O₃ thick-film sensor for CO₂ gas detection. Multidisciplinary Science Journal. 2026;9(1):2027109. doi:10.31893/multiscience.2027109
BibTeX
@article{Sanmugavelan2026,
author = {Sanmugavelan, Kuberahventhan and Jali, Mohd Hafiz and Fuad, Mohamad Aqil Mohd and Chachuli, Siti Amaniah Mohd and Samat, Khairul Fadzli and Harun, Sulaiman Wadi and Thokchom, Siddharth},
title = {Graphene-Doped Eu₂O₃ thick-film sensor for CO₂ gas detection},
journal = {Multidisciplinary Science Journal},
year = {2026},
volume = {9},
number = {1},
pages = {2027109},
doi = {10.31893/multiscience.2027109}
}
EUVIMED