EUVIMEDEUVIMED entdecken
Crossref

Quality Assessment of Shoe Leather Based on the Properties of Strength and Comfort, Collected from Different Footwear and Leather Industries in Bangladesh

Md. Delwar Hossain, Forhad Ahammed Bin Azam, Manjushree Chowdhury

Textile & Leather Review · 02.03.2021 · 4 (1) · 30-37

DOI: 10.31881/tlr.2020.20 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Textile & Leather Review, online erschienen am 02.03.2021. Verfasst von Md. Delwar Hossain und 2 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Based on the environmental condition, a shoe manufactured with different suitable materials has to provide optimum comfort and strength features by using high-quality leather parts. The aim of the study is to evaluate the quality of the shoe upper leather in Bangladesh. Ten different types of shoe leather, made from cow hides and goat skins, were collected from different footwear and leather industries in Bangladesh. The research was carried out by using approved methods of analysis as per the International Union of the Society of Leather Technologists and Chemists’ official methods for physical and chemical analysis. Physical and chemical properties, which were studied three times for each of the samples, were tensile strength, percentage of elongation, tearing strength, grain crack resistance, water vapor permeability, flexing endurance, scuff resistance, perspiration fastness, color rub fastness, bond strength of the finish film, the pH, moisture content, chromic oxide content and fat content, respectively. From the study, it has been revealed that samples 02 and 08 were completely unacceptable, samples 04, 05 and 07 were moderately acceptable, and the remaining samples, 01, 03, 06, 09 and 10, were strongly acceptable on the basis of the ISO standard for shoe leather. To get the better quality, the above mentioned tests should be improved, thus the demand and the value of shoe leather, as well as footwear, will be increased and the rejection rate will be decreased gradually.

Zitieren

APA

Hossain, M. D., Azam, F. A. B., & Chowdhury, M. (2021). Quality Assessment of Shoe Leather Based on the Properties of Strength and Comfort, Collected from Different Footwear and Leather Industries in Bangladesh. Textile & Leather Review, 4(1), 30-37. https://doi.org/10.31881/tlr.2020.20

Vancouver

Hossain MD, Azam FAB, Chowdhury M. Quality Assessment of Shoe Leather Based on the Properties of Strength and Comfort, Collected from Different Footwear and Leather Industries in Bangladesh. Textile & Leather Review. 2021;4(1):30-37. doi:10.31881/tlr.2020.20

BibTeX
@article{Hossain2021,
  author = {Hossain, Md. Delwar and Azam, Forhad Ahammed Bin and Chowdhury, Manjushree},
  title = {Quality Assessment of Shoe Leather Based on the Properties of Strength and Comfort, Collected from Different Footwear and Leather Industries in Bangladesh},
  journal = {Textile & Leather Review},
  year = {2021},
  volume = {4},
  number = {1},
  pages = {30--37},
  doi = {10.31881/tlr.2020.20}
}
Kostenlos starten →