Effect of treatment of low carbon steel tensile test specimen on tensile strength for tractor wheel axle
Protech Biosystems Journal · 2023
DOI: 10.31764/protech.v3i2.20793 ↗Kurz gefasst
Fachartikel in der Zeitschrift Protech Biosystems Journal, 2023. Verfasst von Karyanik Karyanik. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
This study aims to determine the tensile strength of low carbon steel material specimens against the influence of specimen treatment. The method used in the research is an experimental method using a Universal Testing Machine and Vernier Caliper, namely specimen treatment using heating and cooling treatments with certain temperatures or temperatures. The parameters observed include stress, strain, initial diameter and final diameter. The research was carried out in the workshop laboratory of the Faculty of Agriculture, Muhammadiyah Mataram University and the Mechanical Engineering Laboratory, Mataram University. The data obtained were analysed mathematically. The test results showed that carbon steel experienced an increase in stress at a peak point of 350 N/mm2 and broke at a point of 250 N/mm2 at a strain of 31%.
Zitieren
APA
Karyanik, K. (2023). Effect of treatment of low carbon steel tensile test specimen on tensile strength for tractor wheel axle. Protech Biosystems Journal. https://doi.org/10.31764/protech.v3i2.20793
Vancouver
Karyanik K. Effect of treatment of low carbon steel tensile test specimen on tensile strength for tractor wheel axle. Protech Biosystems Journal. 2023. doi:10.31764/protech.v3i2.20793
BibTeX
@article{Karyanik2023,
author = {Karyanik, Karyanik},
title = {Effect of treatment of low carbon steel tensile test specimen on tensile strength for tractor wheel axle},
journal = {Protech Biosystems Journal},
year = {2023},
doi = {10.31764/protech.v3i2.20793}
}
EUVIMED