EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Implementing Statistical Quality Control of refrigerator lamp cover production lines in a plastic injection molding company (Case Study: CV. ABC)

Shafira Eka Nuryanti, R.B. Seno Wulung

Protech Biosystems Journal · 2023

DOI: 10.31764/protech.v3i1.15310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Protech Biosystems Journal, 2023. Verfasst von Shafira Eka Nuryanti und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research intends to detect the existence of uncontrolled quality control in plastic injection molding companies, with refrigerator lamp cover products. Quality control is conducted using the statistical quality control (SQC) method with tools such as check sheets, histograms, and control charts. Check sheets and histograms were used to make it easier to present the data for further analysis. Furthermore, a control chart was used to detect whether the cacative product was still under statistical control or not. The result of the analysis using the p control chart indicated that there was a production process in an uncontrolled state on the 11th day of the production process. The x-chart and R-chart control charts didn't need to be revised because the production was still within the control limits. Therefore, Cp values = 0.3665

Zitieren

APA

Nuryanti, S. E., & Wulung, R. S. (2023). Implementing Statistical Quality Control of refrigerator lamp cover production lines in a plastic injection molding company (Case Study: CV. ABC). Protech Biosystems Journal. https://doi.org/10.31764/protech.v3i1.15310

Vancouver

Nuryanti SE, Wulung RS. Implementing Statistical Quality Control of refrigerator lamp cover production lines in a plastic injection molding company (Case Study: CV. ABC). Protech Biosystems Journal. 2023. doi:10.31764/protech.v3i1.15310

BibTeX
@article{Nuryanti2023,
  author = {Nuryanti, Shafira Eka and Wulung, R.B. Seno},
  title = {Implementing Statistical Quality Control of refrigerator lamp cover production lines in a plastic injection molding company (Case Study: CV. ABC)},
  journal = {Protech Biosystems Journal},
  year = {2023},
  doi = {10.31764/protech.v3i1.15310}
}
Kostenlos starten →