Design and Experimental Evaluation of an Embedded Gyroscopic Stabilization Prototype Using Multiple Control Algorithms
International Journal of Robotics and Control Systems · 07.06.2026 · 6 (3) · 2323-2345
DOI: 10.31763/ijrcs.v6i3.2619 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Robotics and Control Systems, online erschienen am 07.06.2026. Verfasst von Hongyu Huang und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Rolling motion is common in small and medium-sized vessels, especially under challenging sea conditions, which poses risks to navigational safety, equipment reliability, and overall operational efficiency. Gyroscopic stabilization has long been recognized as an effective physical approach for mitigating such motions; however, existing studies often address either mechanical design aspects or the tuning of individual control algorithms in isolation, making objective performance comparison difficult. In this work, an integrated gyroscopic stabilization system is developed by jointly considering mechanical structure, embedded sensing hardware, and control implementation within a laboratory-scale platform. A low-cost MPU6050 inertial measurement unit is employed for real-time attitude sensing, while an ESP32 microcontroller is used as the embedded control core. Within the same mechanical configuration and under identical experimental conditions, three representative control strategies, classical PID, Fuzzy PID, and Adaptive Neuro-Fuzzy Inference System (ANFIS) are implemented and evaluated. Experimental results show that the activation of the gyroscopic flywheel reduces roll RMSE by 58.0% for PID, 50.3% for Fuzzy-PID, and 55.2% for ANFIS, compared with the non-flywheel configuration. Among the investigated controllers, the ANFIS controller achieves the minimum roll RMSE of 6.96, delivering the most effective stabilization with faster convergence and reduced oscillation magnitude. The results show that stabilization performance is significantly affected by the integration of the actuation and control systems. It should be noted that the analysis was conducted using a scaled-down prototype under laboratory conditions, and further research is required to verify its scalability and practical applicability in real marine environments.
Zitieren
APA
Huang, H., Crisnapati, P. N., & Maneetham, D. (2026). Design and Experimental Evaluation of an Embedded Gyroscopic Stabilization Prototype Using Multiple Control Algorithms. International Journal of Robotics and Control Systems, 6(3), 2323-2345. https://doi.org/10.31763/ijrcs.v6i3.2619
Vancouver
Huang H, Crisnapati PN, Maneetham D. Design and Experimental Evaluation of an Embedded Gyroscopic Stabilization Prototype Using Multiple Control Algorithms. International Journal of Robotics and Control Systems. 2026;6(3):2323-2345. doi:10.31763/ijrcs.v6i3.2619
BibTeX
@article{Huang2026,
author = {Huang, Hongyu and Crisnapati, Padma Nyoman and Maneetham, Dechrit},
title = {Design and Experimental Evaluation of an Embedded Gyroscopic Stabilization Prototype Using Multiple Control Algorithms},
journal = {International Journal of Robotics and Control Systems},
year = {2026},
volume = {6},
number = {3},
pages = {2323--2345},
doi = {10.31763/ijrcs.v6i3.2619}
}
EUVIMED