EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Geopolymer vs ordinary portland cement: review of the 3-d printing of concrete

Hamed Rahimpour, Vahed Ghiasi, Ahmad Fahmi, Yaser Marabi

Applied Engineering and Technology · 2023

DOI: 10.31763/aet.v2i2.1010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Engineering and Technology, 2023. Verfasst von Hamed Rahimpour und 3 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to the need of the construction industry to implement structures with special and complex designs, mass customization with the lowest cost, especially reducing the labor cost as well as the amount of waste and materials used, the use of concrete 3D printing can be the appropriate solution to these requirements fulfill these options. As a result, a comprehensive and practical study of the major 3D printing methods and their development in the construction industry was carried out in this study. In addition, the use of OPC-based materials and geopolymer-based materials was reviewed and compared due to the development of the materials industry and the advantages and disadvantages of using different types of cementitious materials in the 3D printing of concrete.

Zitieren

APA

Rahimpour, H., Ghiasi, V., Fahmi, A., & Marabi, Y. (2023). Geopolymer vs ordinary portland cement: review of the 3-d printing of concrete. Applied Engineering and Technology. https://doi.org/10.31763/aet.v2i2.1010

Vancouver

Rahimpour H, Ghiasi V, Fahmi A, Marabi Y. Geopolymer vs ordinary portland cement: review of the 3-d printing of concrete. Applied Engineering and Technology. 2023. doi:10.31763/aet.v2i2.1010

BibTeX
@article{Rahimpour2023,
  author = {Rahimpour, Hamed and Ghiasi, Vahed and Fahmi, Ahmad and Marabi, Yaser},
  title = {Geopolymer vs ordinary portland cement: review of the 3-d printing of concrete},
  journal = {Applied Engineering and Technology},
  year = {2023},
  doi = {10.31763/aet.v2i2.1010}
}
Kostenlos starten →