EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Treatment of real petroleum refinery wastewater using SiO₂/TiO₂ nanocomposite induced by UV–visible light

Sarmad A. Rashid, Wadood T. Mohammed, Harouadi Zine Eddine

Iraqi Journal of Chemical and Petroleum Engineering · 30.06.2026 · 27 (2) · 1-17

DOI: 10.31699/ijcpe.2026.2.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Iraqi Journal of Chemical and Petroleum Engineering, online erschienen am 30.06.2026. Verfasst von Sarmad A. Rashid und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Petroleum refinery wastewater (PRW) is becoming a big problem for both people and the environment, so researchers have been trying harder to find better ways to treat it. One option that looks really promising is using advanced oxidation processes (AOPs) to break down all the pollutants inside this wastewater. In this study, new-designed photoreactor was used to conduct a photocatalysis approach that aimed to remove the chemical oxygen demand (COD) from PRW collected from Al-Diwaniya refinery in the south of Iraq. The geometrically optimized photoreactor enhances the formation of the free radicals required for efficient degradation by maximizing mass transfer and light dispersion. Bare TiO₂ and SiO₂/TiO₂ were fabricated as photocatalysts with the sol-gel technique and then examined by the XRD, FTIR, FESEM, AFM, BET, UV-DRS, and PL analysis. Results showed that, the optimal SiO₂/TiO₂ ratio was 5/95% (S-5) achieving 90% COD reduction efficiency with a photocatalyst dosage of 2 g/L, a reaction time of about 4 h, and using 8 UV-C lamps (8 W each). Under these conditions the process consumed 0.512 kWh/L electricity energy (EE/O). The results demonstrated that COD reduction exhibits behavior consistent with pseudo first order kinetics. In addition, the scavenger experiments revealed that the COD was primarily degraded by the ⦁O₂- radical. After five cycles, the photocatalyst S-5 maintained its stability and continued to remove over 82% of the COD. Refinery effluent was significantly better treated after using this innovative reactor design in conjunction with the SiO₂/TiO₂ photocatalyst. It provides an ecological, more efficient, and less expensive way to lower COD in PRW.

Zitieren

APA

Rashid, S. A., Mohammed, W. T., & Eddine, H. Z. (2026). Treatment of real petroleum refinery wastewater using SiO₂/TiO₂ nanocomposite induced by UV–visible light. Iraqi Journal of Chemical and Petroleum Engineering, 27(2), 1-17. https://doi.org/10.31699/ijcpe.2026.2.1

Vancouver

Rashid SA, Mohammed WT, Eddine HZ. Treatment of real petroleum refinery wastewater using SiO₂/TiO₂ nanocomposite induced by UV–visible light. Iraqi Journal of Chemical and Petroleum Engineering. 2026;27(2):1-17. doi:10.31699/ijcpe.2026.2.1

BibTeX
@article{Rashid2026,
  author = {Rashid, Sarmad A. and Mohammed, Wadood T. and Eddine, Harouadi Zine},
  title = {Treatment of real petroleum refinery wastewater using SiO₂/TiO₂ nanocomposite induced by UV–visible light},
  journal = {Iraqi Journal of Chemical and Petroleum Engineering},
  year = {2026},
  volume = {27},
  number = {2},
  pages = {1--17},
  doi = {10.31699/ijcpe.2026.2.1}
}
Kostenlos starten →