EUVIMEDEUVIMED entdecken
Crossref

Measurement Overall Equipment Effectiveness on Injection Moulding Machine: A Case Study in Injection Moulding Manufacturing Industry

Faisal Umar Nisbantoro, Riyadil Jinan, Humiras Hardi Purba

International Journal of Engineering Research and Advanced Technology · 2018

DOI: 10.31695/ijerat.2018.3302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Engineering Research and Advanced Technology, 2018. Verfasst von Faisal Umar Nisbantoro und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In an injection molding machine, the production process of the ingredients in the form of a plastic seed is inserted into the machine to be qualified to be injected into the molded product mounted on the machine. The calculation of overall equipment effectiveness (OEE) is used to calculate the overall effectiveness of production equipment that refers to indicators of availability, performance and quality. The global standardization of good OEE values is 85%, if there is a value below 85% of the OEE value on a machine means problems with engine availability, engine performance and quality results from the machine. OEE results below 85% were performed with an improvement analysis with a pareto diagram and five why analysis. The calculation of the calculation of the fourth injection molding machine 80 tons obtained machine number one and three are below the 85% standard caused by operator pause. machine redesigning mold cavity molds suitable shrinkage material and water cooling machine used aquadest with pure H2 O content.

Zitieren

APA

Nisbantoro, F. U., Jinan, R., & Purba, H. H. (2018). Measurement Overall Equipment Effectiveness on Injection Moulding Machine: A Case Study in Injection Moulding Manufacturing Industry. International Journal of Engineering Research and Advanced Technology. https://doi.org/10.31695/ijerat.2018.3302

Vancouver

Nisbantoro FU, Jinan R, Purba HH. Measurement Overall Equipment Effectiveness on Injection Moulding Machine: A Case Study in Injection Moulding Manufacturing Industry. International Journal of Engineering Research and Advanced Technology. 2018. doi:10.31695/ijerat.2018.3302

BibTeX
@article{Nisbantoro2018,
  author = {Nisbantoro, Faisal Umar and Jinan, Riyadil and Purba, Humiras Hardi},
  title = {Measurement Overall Equipment Effectiveness on Injection Moulding Machine: A Case Study in Injection Moulding Manufacturing Industry},
  journal = {International Journal of Engineering Research and Advanced Technology},
  year = {2018},
  doi = {10.31695/ijerat.2018.3302}
}
Kostenlos starten →