EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of processed cheese viscoelastic properties during sterilization observed in situ

F Buňka, M Sedlačík, P Foltin, Z Lazárková, M Pětová, L Buňková, K Purevdorj, J Talár, V Kůrová, M Novotný, M Vlkovský, R N Salek

Journal of Dairy Science · 2023

DOI: 10.3168/jds.2022-22833 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Dairy Science, 2023. Verfasst von F Buňka und 11 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Food Quality and Safety Research, Department of Logistics, Faculty of Military Leadership, University of Defence, Kounicova 65, 662 10 …. Hauptthemen laut MEDLINE: Cheese. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerstvo Obrany České Republiky, Ministerstvo Školství, Mládeže a Tělovýchovy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sterilized processed cheese is a specific dairy product with a prolonged shelf life intended for regular retail offer but also as food provisions for armies during peacetime, as well as during crisis and emergency situations, and for storage in state material reserves. Storage requirements are usually defined as ≤25°C for at least 24 mo. One of the ways to achieve such a shelf life is sterilization. Therefore, the aim of the work was to describe, for the first time in the available scientific literature, in situ changes in the viscoelastic properties of spreadable melt (34% wt/wt DM content, 45% wt/wt fat in DM content, and 14% wt/wt protein content) during an increase in temperature (target temperature 122°C), holding at sterilization temperature (20 min) and subsequent cooling (to ~30°C). While increasing to the target sterilization temperature, a significant decrease occurred in the storage and loss moduli values. Both moduli started to increase again during the target sterilization temperature period and during the whole cooling phase. The values of the storage and loss moduli were significantly higher at the end of the cooling of the sterilized product, and conversely, the phase angle value was lower compared with the melt before sterilization. As a result of sterilization, an increase occurred in the levels of markers of the Maillard reaction complex and lipid oxidation processes. The value of hardness, corrected stress, and elongational viscosity also increased compared with nonsterilized products. As a result of sterilization, the flavor worsened and sterilized processed cheeses showed darker (brownish) color. However, even after sterilization, the products were evaluated as acceptable for consumers and maintained their spreadability.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CheeseAnimalsTemperatureMaillard ReactionCold TemperatureSterilizationFood Handling

Stichwörter der Autor:innen

heatingin situ studyprocessed cheeserheologysterilization

Autor:innen und Institutionen

  • Laboratory of Food Quality and Safety Research, Department of Logistics, Faculty of Military Leadership, University of Defence, Kounicova 65, 662 10 Brno, Czech Republic. Electronic address: frantisek.bunka@unob.cz.
  • Centre of Polymer Systems, University Institute, Tomas Bata University in Zlín, Tř. T. Bati 5678, 760 01 Zlín, Czech Republic; Department of Production Engineering, Faculty of Technology, Tomas Bata University in Zlín,…
  • Laboratory of Food Quality and Safety Research, Department of Logistics, Faculty of Military Leadership, University of Defence, Kounicova 65, 662 10 Brno, Czech Republic.
  • Department of Food Technology, Faculty of Technology, Tomas Bata University in Zlín, Vavrečkova 5669, 760 01 Zlín, Czech Republic.
  • Department of Environmental Protection Engineering, Tomas Bata University in Zlín, Faculty of Technology, Vavrečkova 5669, 760 01 Zlín, Czech Republic.

Förderung

  • Ministerstvo Obrany České Republiky
  • Ministerstvo Školství, Mládeže a Tělovýchovy

Zitieren

APA

Buňka, F., Sedlačík, M., Foltin, P., Lazárková, Z., Pětová, M., Buňková, L., Purevdorj, K., Talár, J., Kůrová, V., Novotný, M., Vlkovský, M., & Salek, R. N. (2023). Evaluation of processed cheese viscoelastic properties during sterilization observed in situ. Journal of Dairy Science. https://doi.org/10.3168/jds.2022-22833

Vancouver

Buňka F, Sedlačík M, Foltin P, Lazárková Z, Pětová M, Buňková L, et al. Evaluation of processed cheese viscoelastic properties during sterilization observed in situ. Journal of Dairy Science. 2023. doi:10.3168/jds.2022-22833

BibTeX
@article{Buka2023,
  author = {Buňka, F and Sedlačík, M and Foltin, P and Lazárková, Z and Pětová, M and Buňková, L and Purevdorj, K and Talár, J and Kůrová, V and Novotný, M and Vlkovský, M and Salek, R N},
  title = {Evaluation of processed cheese viscoelastic properties during sterilization observed in situ},
  journal = {Journal of Dairy Science},
  year = {2023},
  doi = {10.3168/jds.2022-22833}
}
Kostenlos starten →