EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Enhancing pyrolysis oil yield and quality via low-temperature catalytic pyrolysis of pet waste over activated carbon derived from euxideroxylon zwageri

Ahmad Yani, Widya Wijayanti, Mega Nur Sasongko, Slamet Wahyudi, Dwi Irawan

Mechanical Engineering for Society and Industry · 22.07.2026 · 6 (2)

DOI: 10.31603/mesi.16415 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mechanical Engineering for Society and Industry, online erschienen am 22.07.2026. Verfasst von Ahmad Yani und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the low-temperature pyrolysis of post-consumer polyethylene terephthalate (PET) from room temperature to 350 °C using biomass-derived activated carbon from Euxideroxylon zwageri (EZAC) as a renewable catalyst/adsorbent. PET–EZAC blends (100:0, 95:5, 90:10, 85:15, and 80:20; total feed 500 g) were processed in a fixed-bed reactor under an inert atmosphere. EZAC significantly shifted product distribution and exhibited an optimum at PET:EZAC = 90:10 (w/w), which produced the maximum oil yield of 543 mL (404 g; 80.8 wt%) and exceeded the oil yield from non-catalytic PET pyrolysis. Under this optimum condition, fuel-relevant properties improved, yielding an research octane number (RON) of 97 and a higher heating value (HHV) of 47.88 MJ/kg; the flash point and kinematic viscosity decreased to 13 °C and 2.384 cSt, respectively, while density remained nearly constant (0.772 g/mL). GC–MS results showed the most gasoline-like composition at PET:EZAC = 90:10, dominated by the C7–C10 fraction (62.95%) with a balanced hydrocarbon-class distribution (Alkanes 64.64%, Olefin 27.61%, and Aromatics 7.75%). MQ sensor-based gas profiles further suggested that EZAC accelerated the onset of H₂ and CH₄ formation, with peak sensor responses of 745 ppm for H₂ and 871 ppm for CH₄ at 20% EZAC. Overall, EZAC is a promising renewable material for steering secondary reactions during low-temperature PET pyrolysis, thereby improving both oil yield and oil quality.

Zitieren

APA

Yani, A., Wijayanti, W., Sasongko, M. N., Wahyudi, S., & Irawan, D. (2026). Enhancing pyrolysis oil yield and quality via low-temperature catalytic pyrolysis of pet waste over activated carbon derived from euxideroxylon zwageri. Mechanical Engineering for Society and Industry, 6(2). https://doi.org/10.31603/mesi.16415

Vancouver

Yani A, Wijayanti W, Sasongko MN, Wahyudi S, Irawan D. Enhancing pyrolysis oil yield and quality via low-temperature catalytic pyrolysis of pet waste over activated carbon derived from euxideroxylon zwageri. Mechanical Engineering for Society and Industry. 2026;6(2). doi:10.31603/mesi.16415

BibTeX
@article{Yani2026,
  author = {Yani, Ahmad and Wijayanti, Widya and Sasongko, Mega Nur and Wahyudi, Slamet and Irawan, Dwi},
  title = {Enhancing pyrolysis oil yield and quality via low-temperature catalytic pyrolysis of pet waste over activated carbon derived from euxideroxylon zwageri},
  journal = {Mechanical Engineering for Society and Industry},
  year = {2026},
  volume = {6},
  number = {2},
  doi = {10.31603/mesi.16415}
}
Kostenlos starten →