Experimental evaluation on the power characteristic of direct-photovoltaic charging for thermal storage equipment
Mechanical Engineering for Society and Industry · 2024
DOI: 10.31603/mesi.11493 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mechanical Engineering for Society and Industry, 2024. Verfasst von Reza Abdu Rahman und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Thermal storage is an essential equipment for storing excessive heat, especially for water heating systems. The present work proposes a preliminary study to maximize the operation of thermal storage using photovoltaics as the primary source for charging the heat storage material. The assessment indicates the concept is feasible, where the output power from photovoltaics can be directly converted to heat using a heating element. The power ratio is considerably high (up to 38.6%), resulting in the maximum temperature of the heat absorber material (water) increasing to 43.2 °C. The final assessment using suitable phase transition material shows that steady phase behavior is essential to maximizing the temperature profile of the material. It is achieved using stabilized-hexadecanoic acid, which shows a transient phase transition at a temperature of 54.2 °C, reducing the possibility of heat loss with an average temperature rate of 0.54 °C/min in the discharge stage. This finding proves the proposed concept is applicable, while further improvement can be done to adjust the suitable power output from photovoltaic and storage tank arrangement for the actual system. Despite that, the result is expected to accelerate the utilization of photovoltaics as reliable solar renewable technology.
Zitieren
APA
Rahman, R. A., Sulistyo, S., Utomo, M. S. K. T. S., Ragil, D., & Suyitno, B. M. (2024). Experimental evaluation on the power characteristic of direct-photovoltaic charging for thermal storage equipment. Mechanical Engineering for Society and Industry. https://doi.org/10.31603/mesi.11493
Vancouver
Rahman RA, Sulistyo S, Utomo MSKTS, Ragil D, Suyitno BM. Experimental evaluation on the power characteristic of direct-photovoltaic charging for thermal storage equipment. Mechanical Engineering for Society and Industry. 2024. doi:10.31603/mesi.11493
BibTeX
@article{Rahman2024,
author = {Rahman, Reza Abdu and Sulistyo, Sulistyo and Utomo, Mohamad Said Kartono Tony Suryo and Ragil, Dimas and Suyitno, Budhi Muliawan},
title = {Experimental evaluation on the power characteristic of direct-photovoltaic charging for thermal storage equipment},
journal = {Mechanical Engineering for Society and Industry},
year = {2024},
doi = {10.31603/mesi.11493}
}
EUVIMED