EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Design, Implementation, and Evaluation of a Fingerprint-Based Ignition Key for Motorcycles

Heru Supriyono, Anugrah Adi Wijayanto, Rozita Jailani, Mohammad Osman Tokhi

Automotive Experiences · 18.06.2020 · 3 (2) · 68-80

DOI: 10.31603/ae.v3i2.3586 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Automotive Experiences, online erschienen am 18.06.2020. Verfasst von Heru Supriyono und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cases of motorcycle theft by breaking mechanical key are still a serious problem in some countries. Therefore, this article discusses the process of development, implementation, and evaluation of a fingerprint-based ignition key for motorcycles. To prevent theft, a motorcycle can only be turned on by a registered fingerprint, and an alarm will ring if the sensor receives an unregistered fingerprint. This prototype used the main component of the SEN0188 fingerprint sensor, Arduino Uno microcontroller, LM317 voltage regulator, and the buzzer alarm module. The test results in shaded place showed that the proposed key successfully ignited the engine by 80% with a dry and clean thumb. However, if the thumb is oily or dirty, the success scanning rate is only 36% of 25 attempts. The proposed key also successfully activates a warning alarm if a fingerprint scan attempt fails three times in a row. Test results on potholes, bumpy, dusty, and puddles roads indicate that no hardware has been disturbed or damaged. Therefore, this prototype has the potential to be further developed and implemented on a large scale in an effort to reduce motorcycle theft rates.

Zitieren

APA

Supriyono, H., Wijayanto, A. A., Jailani, R., & Tokhi, M. O. (2020). Design, Implementation, and Evaluation of a Fingerprint-Based Ignition Key for Motorcycles. Automotive Experiences, 3(2), 68-80. https://doi.org/10.31603/ae.v3i2.3586

Vancouver

Supriyono H, Wijayanto AA, Jailani R, Tokhi MO. Design, Implementation, and Evaluation of a Fingerprint-Based Ignition Key for Motorcycles. Automotive Experiences. 2020;3(2):68-80. doi:10.31603/ae.v3i2.3586

BibTeX
@article{Supriyono2020,
  author = {Supriyono, Heru and Wijayanto, Anugrah Adi and Jailani, Rozita and Tokhi, Mohammad Osman},
  title = {Design, Implementation, and Evaluation of a Fingerprint-Based Ignition Key for Motorcycles},
  journal = {Automotive Experiences},
  year = {2020},
  volume = {3},
  number = {2},
  pages = {68--80},
  doi = {10.31603/ae.v3i2.3586}
}
Kostenlos starten →