Analisis Pengendalian Kualitas Untuk Menurunkan Jumlah Defect Produk Handle Comp 2DP Dengan Metode DMAIC Di PT. CNC
Journal of Industrial and Engineering System · 2024
DOI: 10.31599/evtr3707 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Industrial and Engineering System, 2024. Verfasst von Alloysius Vendhi Prasmoro und 3 weiteren Autor:innen.
Abstract (Originalsprache)
PT.CNC experienced quality problems in its Handle Comp 2DP product with a current defect percentage of 4.2% where the defect tolerance target is 2.0%. The purpose of this study was to identify the causes of defects in the Handle Comp 2DP product and to provide suggestions for improving the quality control of the Handle Comp 2DP product with a tight stay mirror problem. In this study the method used is Six Sigma.. Factors that cause defects in Handle Comp 2DP are influenced by angle shifts of 11.3 ° ± 3 which are not detected on the inspection. After the sigma calculation, the sigma value before the repair was 3.2 and after the repair was made it became 3.9. Attempts to reduce the Handle Comp 2DP problem, the stay mirror problem is tight by doing a number of things repair among the process jigs plus blocks and made exactly the same as the tools in the process check finish good, added clamp toggle in position upper body racket handle cover 2 and 3 so it doesn't slide when assy process and make tool poka yoke to cover the 11.3°±3.
Zitieren
APA
Prasmoro, A. V., Indrawan, M. A., Solihin, S., & Dharmayanti4, I. (2024). Analisis Pengendalian Kualitas Untuk Menurunkan Jumlah Defect Produk Handle Comp 2DP Dengan Metode DMAIC Di PT. CNC. Journal of Industrial and Engineering System. https://doi.org/10.31599/evtr3707
Vancouver
Prasmoro AV, Indrawan MA, Solihin S, Dharmayanti4 I. Analisis Pengendalian Kualitas Untuk Menurunkan Jumlah Defect Produk Handle Comp 2DP Dengan Metode DMAIC Di PT. CNC. Journal of Industrial and Engineering System. 2024. doi:10.31599/evtr3707
BibTeX
@article{Prasmoro2024,
author = {Prasmoro, Alloysius Vendhi and Indrawan, Muhammad Ade and Solihin, Solihin and Dharmayanti4, Indrani},
title = {Analisis Pengendalian Kualitas Untuk Menurunkan Jumlah Defect Produk Handle Comp 2DP Dengan Metode DMAIC Di PT. CNC},
journal = {Journal of Industrial and Engineering System},
year = {2024},
doi = {10.31599/evtr3707}
}
EUVIMED