EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modelling the effect of depth, width, and velocity of tillage tine on soil stress and draught using the finite element method

Meysam Latifi Amoghin, Gholamhossein Shahgholi, Agata Dziwulska-Hunek, Mariusz Szymanek

International Agrophysics · 09.12.2024 · 39 (1) · 29-39

DOI: 10.31545/intagr/195905 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Agrophysics, online erschienen am 09.12.2024. Verfasst von Meysam Latifi Amoghin und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

. Four types of narrow tines with different widths but the same length of 1 m were analysed. Field trials were conducted in clay loam soil in a factorial experiment based on a randomized complete block design with three replications. The soil moisture was 15%, and four tractor forward speeds of 1, 1.5, 1.8, and 3 km h -1 and tine widths of 2.5, 3, 3.5, and 4 cm at working depths of 10, 20, 30, and 40 cm were investigated relative to the required draught. In order to investigate the effect of the depth/width ratio and the speed of the narrow tillage blade on the draught force, a three-dimensional model was prepared and tested at different settings. The results of the draught force applied to the blade were recorded. Increasing the forward speed showed a significant effect on increasing the stress exerted on the soil, but increasing the depth/width ratio reduced the stress created in the soil. It was found that the forward speed, tilling depth, and tine width increment exerted a significant effect on increasing the required draught.

Zitieren

APA

Amoghin, M. L., Shahgholi, G., Dziwulska-Hunek, A., & Szymanek, M. (2024). Modelling the effect of depth, width, and velocity of tillage tine on soil stress and draught using the finite element method. International Agrophysics, 39(1), 29-39. https://doi.org/10.31545/intagr/195905

Vancouver

Amoghin ML, Shahgholi G, Dziwulska-Hunek A, Szymanek M. Modelling the effect of depth, width, and velocity of tillage tine on soil stress and draught using the finite element method. International Agrophysics. 2024;39(1):29-39. doi:10.31545/intagr/195905

BibTeX
@article{Amoghin2024,
  author = {Amoghin, Meysam Latifi and Shahgholi, Gholamhossein and Dziwulska-Hunek, Agata and Szymanek, Mariusz},
  title = {Modelling the effect of depth, width, and velocity of tillage tine on soil stress and draught using the finite element method},
  journal = {International Agrophysics},
  year = {2024},
  volume = {39},
  number = {1},
  pages = {29--39},
  doi = {10.31545/intagr/195905}
}
Kostenlos starten →