Electrochemical Oxidation of Methyl Orange as a Model Azo Dye Pollutant: Comparative Electrode Performance, EIS Mechanistic Analysis, and Techno-Economic Assessment
Bulletin of the Karaganda University "Physics Series" · 25.06.2026 · 12231 (2) · 49-57
DOI: 10.31489/2026ph2/49-57 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bulletin of the Karaganda University "Physics Series", online erschienen am 25.06.2026. Verfasst von D.A. Zakari und 4 weiteren Autor:innen.
Abstract (Originalsprache)
This study investigates the electrochemical oxidation (EO) of methyl orange (MO) as a model azo dye pollu tant representative of textile and industrial effluents, using boron-doped diamond (BDD) and dimensionally stable anode (DSA) electrodes under systematically optimized conditions. Model solutions were prepared in ultrapure water with 0.1 M Na2SO4 as the supporting electrolyte. Batch experiments were conducted in gal vanostatic mode at 25 ± 1 °C with constant stirring (300 rpm), varying current densities (10–50 mA/cm²), pH values (2–10), and initial methyl orange concentrations (50–500 mg/L). BDD anodes achieved 94.3 ± 2.1 % pollutant removal within 120 min at optimal conditions (30 mA/cm², pH 3.0, 200 mg/L), significantly outper forming DSA (87.6 ± 3.3 %) and platinum (68.7 ± 4.5 %) electrodes. Electrochemical impedance spectrosco py (EIS) using a Randles R(Cdl(RctW)) equivalent circuit revealed a 73 % decrease in charge transfer re sistance (Rct: 385 Ω → 104 Ω) with increasing anodic potential (1.0–2.5 V vs. Ag/AgCl), confirming Butler Volmer-controlled oxidation kinetics. The apparent rate constant kapp = 0.0315 ± 0.0018 min–1 for BDD was 1.68-fold greater than for platinum. Total organic carbon (TOC) analysis confirmed near-complete minerali zation (96.8 ± 1.5 % TOC reduction) with BDD. Specific energy consumption was minimized to 8.2 kWh/m3, indicating the potential competitiveness of this approach for treating dye-containing effluents. At Nigerian electricity tariffs (₦45/kWh), estimated treatment cost is ₦369/m³, suggesting feasibility for industrial appli cation in developing economies, pending validation with real effluent matrices.
Zitieren
APA
Zakari, D., Audu, G., Aliyu, A., Mustapha, I., & Omatola, K. (2026). Electrochemical Oxidation of Methyl Orange as a Model Azo Dye Pollutant: Comparative Electrode Performance, EIS Mechanistic Analysis, and Techno-Economic Assessment. Bulletin of the Karaganda University "Physics Series", 12231(2), 49-57. https://doi.org/10.31489/2026ph2/49-57
Vancouver
Zakari D, Audu G, Aliyu A, Mustapha I, Omatola K. Electrochemical Oxidation of Methyl Orange as a Model Azo Dye Pollutant: Comparative Electrode Performance, EIS Mechanistic Analysis, and Techno-Economic Assessment. Bulletin of the Karaganda University "Physics Series". 2026;12231(2):49-57. doi:10.31489/2026ph2/49-57
BibTeX
@article{Zakari2026,
author = {Zakari, D.A. and Audu, G.A. and Aliyu, A.A. and Mustapha, I.O. and Omatola, K.M.},
title = {Electrochemical Oxidation of Methyl Orange as a Model Azo Dye Pollutant: Comparative Electrode Performance, EIS Mechanistic Analysis, and Techno-Economic Assessment},
journal = {Bulletin of the Karaganda University "Physics Series"},
year = {2026},
volume = {12231},
number = {2},
pages = {49--57},
doi = {10.31489/2026ph2/49-57}
}
EUVIMED