Effect of fine tire rubbers on the compressive strength of concrete with respect to the geometry of the test specimen
Journal of Structural Engineering & Applied Mechanics · 05.07.2025 · 9 (2)
DOI: 10.31462/jseam.2026.688 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Structural Engineering & Applied Mechanics, online erschienen am 05.07.2025. Verfasst von Abdulhamit Nakipoğlu und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Worldwide standards give details about the standard size and dimensions of specimen that should be used to determine the compressive strength of concrete. However, these relationships are generally available for plain concrete. Limited information is available regarding the effect of geometry of the test specimen on the compressive strength of concrete incorporating additive materials such as rubberized concrete. In the current work, the effect of incorporation of tire rubber on the compressive strength of concrete has been experimentally investigated. Fine tire rubber particles were added to concrete by 0%, 2%, 4%, and 6% by volume. The results revealed that the compressive strength of concrete decreases linearly as the content of rubber increased. The results also showed that the compressive strength of rubberized concrete depends on the specimen size and slenderness ratio, decreasing as the slenderness ratio increases. Results also revealed that standard cylindrical-to-cubic compressive strength for plain concrete (generally 0.8) may not be applied directly for concrete containing additive materials such as tire rubber. This ratio was found to be equal to approximately 0.72 for C16/20 grade rubberized concrete. Regardless of the test specimen geometry, a strong linear relationship was observed, with each 1% increase in fine rubber content (by volume) reducing the compressive strength of concrete by approximately 6%.
Zitieren
APA
Nakipoğlu, A., Cemaloğlu, M., & Döndüren, M. S. (2025). Effect of fine tire rubbers on the compressive strength of concrete with respect to the geometry of the test specimen. Journal of Structural Engineering & Applied Mechanics, 9(2). https://doi.org/10.31462/jseam.2026.688
Vancouver
Nakipoğlu A, Cemaloğlu M, Döndüren MS. Effect of fine tire rubbers on the compressive strength of concrete with respect to the geometry of the test specimen. Journal of Structural Engineering & Applied Mechanics. 2025;9(2). doi:10.31462/jseam.2026.688
BibTeX
@article{Nakipolu2025,
author = {Nakipoğlu, Abdulhamit and Cemaloğlu, Muhammed and Döndüren, Mahmud Sami},
title = {Effect of fine tire rubbers on the compressive strength of concrete with respect to the geometry of the test specimen},
journal = {Journal of Structural Engineering & Applied Mechanics},
year = {2025},
volume = {9},
number = {2},
doi = {10.31462/jseam.2026.688}
}
EUVIMED