Comparative analysis for effects of gross and effective cross-sectional stiffness on seismic response of RC buildings
Journal of Structural Engineering & Applied Mechanics · 05.07.2025 · 9 (2)
DOI: 10.31462/jseam.2026.649 ↗Kurz gefasst
Querschnittstudie in der Zeitschrift Journal of Structural Engineering & Applied Mechanics, online erschienen am 05.07.2025. Verfasst von Adeel Arif und 2 weiteren Autor:innen.
Abstract (Originalsprache)
In seismic performance assessment of reinforced concrete structures, member stiffness is believed to be a critical modelling decision. In realistic conditions, the effective stiffness and flexural stiffness of members reduce due to lateral earthquake loads. The existing design codes, such as TBDY-18 and ASCE 41-17, recommend that stiffness modifiers be used to compensate for this decrease in linear elastic analysis procedures. Although this modelling option is significant, there are still very few systematic comparative studies that quantify the variations in seismic demand between gross and code-prescribed effective stiffness assumptions, especially when structures are evaluated under the conditions of Turkish seismic hazard. This work is a comparative linear time history analysis of a four-story, regular reinforced concrete moment-resisting frame simulated in ETABS. Three assumptions of the stiffness model were considered: gross section properties as a baseline; TBDY-18 effective stiffness modifiers; and ASCE 41-17 effective stiffness modifiers. Eleven pairs of spectrum-matched ground motions, which are compliant with the DD-2 hazard level and site conditions in Sakarya Province, Turkey, were used and verified against TBDY-18. The fundamental period was found to be increased by around 30-38% by adopting effective stiffness assumptions opposed to the baseline stiffness model through model analysis. Besides, the story displacement and inter-story drift ratios were recorded to increase under linear time history analysis, as the ratios of inter-story drift increased by 26-66% and top-story displacements by 46-59%. However, under effective stiffness models in the X and Y directions, the base shear was reduced by 21-23% and the overturning moments by 23-25% compared to the gross section baseline. The results show that gross stiffness assumptions underestimate deformation demands but overestimate force demands. Thus, effective stiffness modifiers are necessary to avoid non-conservative performance assessments in code-based linear seismic analysis.
Zitieren
APA
Arif, A., Boru, E., & Kırtel, O. (2025). Comparative analysis for effects of gross and effective cross-sectional stiffness on seismic response of RC buildings. Journal of Structural Engineering & Applied Mechanics, 9(2). https://doi.org/10.31462/jseam.2026.649
Vancouver
Arif A, Boru E, Kırtel O. Comparative analysis for effects of gross and effective cross-sectional stiffness on seismic response of RC buildings. Journal of Structural Engineering & Applied Mechanics. 2025;9(2). doi:10.31462/jseam.2026.649
BibTeX
@article{Arif2025,
author = {Arif, Adeel and Boru, Elif and Kırtel, Osman},
title = {Comparative analysis for effects of gross and effective cross-sectional stiffness on seismic response of RC buildings},
journal = {Journal of Structural Engineering & Applied Mechanics},
year = {2025},
volume = {9},
number = {2},
doi = {10.31462/jseam.2026.649}
}
EUVIMED