EUVIMEDEUVIMED entdecken
Crossref

Online Battery Parameter And Open Circuit Voltage (OCV) Estimation Using Recursive Least Square (RLS)

Harmoko Harmoko, Dani Prasetyo, Sigit Agung Widayat, Lora Khaula Amifia, Bobby Rian Dewangga, Adha Imam Cahyadi, Oyas Wahyunggoro

Techné : Jurnal Ilmiah Elektroteknika · 2016

DOI: 10.31358/techne.v15i01.141 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Techné : Jurnal Ilmiah Elektroteknika, 2016. Verfasst von Harmoko Harmoko und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

After decades, the battery usage has been widespread for many applications, especially in the field of Electric Vehicle (EV). The battery is a very important component in the EV. Because the battery as the primary power source replacement of the fossil fuel. Therefore, the condition of the batteries should be always in good condition. To prevent failure of the battery for battery management system (BMS) is needed. BMS is a system to regulate the use of the battery and protects the battery from the failure of the battery supply. Many factors can be monitored at BMS, one of which is a State of Charge (SOC). SOC determination is directly related to the estimated OCV (Open Circuit Voltage). The accuracy of the estimation algorithms depend on the accuracy of the model selection to describe the dynamic characteristics of the battery. This study begins with the selection of the right model (fig.1, fig.2, fig.3) for estimating OCV. Selection of appropriate model using RLS algorithm for estimate the battery terminal voltage. Parameter that reference for determining the selection of the model is the max, min, mean, RMSE, mean RMSE of the error. Later models have been used to estimate the OCV. The result based on this research shows that modeling with n = 1 is the best result to be used in model parameter estimation and OCV battery in term of the smaller max, min, mean, rmse error. This research also show us that RLS algorithm can be estimate the parameters of the batery, OCV (fig.4), and terminal voltage of the battery with an error less than 0.1%

Zitieren

APA

Harmoko, H., Prasetyo, D., Widayat, S. A., Amifia, L. K., Dewangga, B. R., Cahyadi, A. I., & Wahyunggoro, O. (2016). Online Battery Parameter And Open Circuit Voltage (OCV) Estimation Using Recursive Least Square (RLS). Techné : Jurnal Ilmiah Elektroteknika. https://doi.org/10.31358/techne.v15i01.141

Vancouver

Harmoko H, Prasetyo D, Widayat SA, Amifia LK, Dewangga BR, Cahyadi AI, et al. Online Battery Parameter And Open Circuit Voltage (OCV) Estimation Using Recursive Least Square (RLS). Techné : Jurnal Ilmiah Elektroteknika. 2016. doi:10.31358/techne.v15i01.141

BibTeX
@article{Harmoko2016,
  author = {Harmoko, Harmoko and Prasetyo, Dani and Widayat, Sigit Agung and Amifia, Lora Khaula and Dewangga, Bobby Rian and Cahyadi, Adha Imam and Wahyunggoro, Oyas},
  title = {Online Battery Parameter And Open Circuit Voltage (OCV) Estimation Using Recursive Least Square (RLS)},
  journal = {Techné : Jurnal Ilmiah Elektroteknika},
  year = {2016},
  doi = {10.31358/techne.v15i01.141}
}
Kostenlos starten →