EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Characterization of Polylactic Acid/Chitosan/Cellulose Nanofibers for Wound Dressing Applications

Belinda Laulista, Desy Miftachul, Lilik Suprianti, Tri Widjaja, Aisyah Alifatul Zahidah Rohmah, Citra Yulia Sari

Eksergi · 27.04.2026 · 23 (2) · 62-71

DOI: 10.31315/eksergi.v23i2.16532 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eksergi, online erschienen am 27.04.2026. Verfasst von Belinda Laulista und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Effective wound care requires dressing materials that provide physical protection while actively encouraging tissue regeneration. This research investigates the development and characterization of biocomposite nanofiber membranes composed of polylactic acid (PLA), chitosan, and cellulose, synthesized via the electrospinning method at an optimized operating voltage of 20 kV. The study aimed to identify the optimal material ratio that balances mechanical durability with surface wettability. Comprehensive evaluations included Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR), water contact angle (WCA) measurements, and mechanical testing. The results demonstrate that the integration of chitosan and cellulose significantly refined fiber morphology and wettability. The optimal variant with a composition of 90:5:5 wt.% (PLA:chitosan:cellulose) achieved a WCA of 98.64°, indicating that the hydrophobicity was maintained relative to pure PLA. M orphologically, the composite fibers were uniform and bead-less, with a mean diameter reduction of 36.2% (from 517.12 nm in pure PLA to 329.68 nm). FTIR spectra confirmed successful component incorporation through characteristic amide and hydroxyl bands. Mechanically, the composite membrane exhibited a superior synergy between strength and flexibility, achieving a yield strength of 0.06 MPa and a significant elongation at break of 80.36%. These findings suggest that the 90:5:5 formulation successfully bridges the gap between mechanical durability and the high surface area-to-volume ratio required for advanced, biodegradable wound care applications.

Zitieren

APA

Laulista, B., Miftachul, D., Suprianti, L., Widjaja, T., Rohmah, A. A. Z., & Sari, C. Y. (2026). Characterization of Polylactic Acid/Chitosan/Cellulose Nanofibers for Wound Dressing Applications. Eksergi, 23(2), 62-71. https://doi.org/10.31315/eksergi.v23i2.16532

Vancouver

Laulista B, Miftachul D, Suprianti L, Widjaja T, Rohmah AAZ, Sari CY. Characterization of Polylactic Acid/Chitosan/Cellulose Nanofibers for Wound Dressing Applications. Eksergi. 2026;23(2):62-71. doi:10.31315/eksergi.v23i2.16532

BibTeX
@article{Laulista2026,
  author = {Laulista, Belinda and Miftachul, Desy and Suprianti, Lilik and Widjaja, Tri and Rohmah, Aisyah Alifatul Zahidah and Sari, Citra Yulia},
  title = {Characterization of Polylactic Acid/Chitosan/Cellulose Nanofibers for Wound Dressing Applications},
  journal = {Eksergi},
  year = {2026},
  volume = {23},
  number = {2},
  pages = {62--71},
  doi = {10.31315/eksergi.v23i2.16532}
}
Kostenlos starten →