Analyze Thermal Installation in Buildings for Different Insulations and Thicknesses Using Computational Fluid Dynamic
Mustansiriyah Journal of Materials Engineering and Sustainability · 2025
DOI: 10.31272/mjmes.v1i1.2 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mustansiriyah Journal of Materials Engineering and Sustainability, 2025. Verfasst von Afreen Emad Sa’ad-Aldeen und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
The purpose of thermal insulation is to reduce the rate of heat transfer. The goal of this work is to investigate the impact of various insulator species that can be utilized to increase thermal insulation. In the present investigation, natural heat transfer investigations are accomplished with a wooden box enclosure and four insulating materials with different thermal conductivity and two thicknesses of 2 cm and 4 cm for each piece. Four pieces of insulating material are PE foam, Polyisocyanurate, Polystyrene (XPS 300) and wood that is each piece attached in the middle space of the wooden test cell to achieve two parts up and down flow region. The experimental work is done with heat flux (350,500 and 650W/m2) and Ra numbers ranging from (2.19×105 to 1.30×106). Also, the wooden test cell is simulated using computational fluid dynamics by using 3D Fluent Ansys software program version 17.2 for temperature distribution through insulation and enclosure with heat flux (500 W/m2) and Ra numbers ranging from (2.19×105 to 1.30×106). The results are shown when there is a reduction in insulator conductivity, so a decrease in the heat transfer through the box walls results in preferable thermal insulation for the box. The relationship between thermal conductivity (k) and the optimum thickness of various insulation materials (topt) is investigated with a polynomial non-linear correlation. This correlation will be particularly useful in estimating the ideal thickness of insulators for minimizing heat transfer meanwhile an insulation material based solely on its thermal conductivity.
Zitieren
APA
Sa’ad-Aldeen, A. E., & Sarow, S. A. (2025). Analyze Thermal Installation in Buildings for Different Insulations and Thicknesses Using Computational Fluid Dynamic. Mustansiriyah Journal of Materials Engineering and Sustainability. https://doi.org/10.31272/mjmes.v1i1.2
Vancouver
Sa’ad-Aldeen AE, Sarow SA. Analyze Thermal Installation in Buildings for Different Insulations and Thicknesses Using Computational Fluid Dynamic. Mustansiriyah Journal of Materials Engineering and Sustainability. 2025. doi:10.31272/mjmes.v1i1.2
BibTeX
@article{SaadAldeen2025,
author = {Sa’ad-Aldeen, Afreen Emad and Sarow, Salwa Ahmad},
title = {Analyze Thermal Installation in Buildings for Different Insulations and Thicknesses Using Computational Fluid Dynamic},
journal = {Mustansiriyah Journal of Materials Engineering and Sustainability},
year = {2025},
doi = {10.31272/mjmes.v1i1.2}
}
EUVIMED