Finite Element Analysis of In-plane Cyclic Loading on Masonry Walls with Traditional Mortars Used in Nepal Using Simplified Micro-modeling
Journal of Science and Engineering · 27.07.2026 · 13 (2) · 33-45
DOI: 10.3126/jsce.v13i2.96571 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Science and Engineering, online erschienen am 27.07.2026. Verfasst von Ratna Shova Prajapati und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Masonry construction relies critically on the mechanical performance of mortar joints, especially under cyclic loading such as seismic action. This study numerically investigates the in-plane cyclic behavior of masonry walls built with cement, lime-surkhi, and mud mortars using a validated simplified micro-modeling approach in ABAQUS. The finite element model demonstrates strong agreement with experimental benchmarks, replicating load-displacement response, crack propagation, and stress redistribution with a root mean square error of 1.3%. Under cyclic loading, each mortar type exhibited distinct degradation patterns quantified by key metrics: cement mortar showed high initial stiffness ( 170 kN/mm) but rapid stiffness loss of approximately 75% within the first 1 mm displacement, indicating swift yielding despite good energy dissipation. Lime-surkhi mortar exhibited moderate ductility with a gradual stiffness reduction from 25 kN/mm to 5 kN/mm over 4 mm displacement. Mud mortar demonstrated negligible structural capacity, with brittle failure occurring at 15 kN and 3 mm displacement, constant low stiffness ( 5 kN/mm), and minimal energy dissipation. Analysis of equivalent plastic strain (PEEQT) and tensile damage (DAMAGET) provided further insight into mortar-specific damage evolution. These quantitative findings offer a clear performance hierarchy to inform the resilient design and restoration of masonry structures, particularly those of cultural and historical significance.
Zitieren
APA
Prajapati, R. S., Shrestha, R., & Kasula, A. (2026). Finite Element Analysis of In-plane Cyclic Loading on Masonry Walls with Traditional Mortars Used in Nepal Using Simplified Micro-modeling. Journal of Science and Engineering, 13(2), 33-45. https://doi.org/10.3126/jsce.v13i2.96571
Vancouver
Prajapati RS, Shrestha R, Kasula A. Finite Element Analysis of In-plane Cyclic Loading on Masonry Walls with Traditional Mortars Used in Nepal Using Simplified Micro-modeling. Journal of Science and Engineering. 2026;13(2):33-45. doi:10.3126/jsce.v13i2.96571
BibTeX
@article{Prajapati2026,
author = {Prajapati, Ratna Shova and Shrestha, Rameswor and Kasula, Anil},
title = {Finite Element Analysis of In-plane Cyclic Loading on Masonry Walls with Traditional Mortars Used in Nepal Using Simplified Micro-modeling},
journal = {Journal of Science and Engineering},
year = {2026},
volume = {13},
number = {2},
pages = {33--45},
doi = {10.3126/jsce.v13i2.96571}
}
EUVIMED