EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of Compressive and Flexural Strength of Lime-Surkhi Mortar

Prashant Bharati, Rajwala Khatakho, Rojan Byanju, Salina Suwal, Ratna Shova Prajapati

International Journal on Engineering Technology · 18.06.2026 · 3 (2) · 317-326

DOI: 10.3126/injet.v3i2.95602 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal on Engineering Technology, online erschienen am 18.06.2026. Verfasst von Prashant Bharati und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lime-surkhi mortar is a traditional binder used in historic masonry structures in Nepal. Despite its widespread application, compressive and flexural properties of lime-surkhi mortar remain poorly quantified, limiting its reliable use in heritage conservation and structural assessment. This study experimentally investigates the compressive and flexural behavior of lime-surkhi mortar prepared with quicklime-based lime putty, varying surkhi and sand proportions at a constant lime content. Following initial screening of thirteen mix ratios, the 1:1:2 and 1:2:2 mixes were selected for detailed analysis. Specimens were air-cured at 70–80% relative humidity and tested at 7 and 28 days. Cube compressive strength increased by approximately 22 times for the 1:1:2 mix and 14 times for the 1:2:2 mix between 7 and 28 days. Masonry prism compressive strength increased by about 1.7 times for both mixes. While the 1:2:2 mix showed higher cube compressive strength, the 1:1:2 mix exhibited superior prism performance, highlighting the significance of mortar–unit interaction. The flexural strength of the 1:1:2 mix increased slightly with curing, whereas the 1:2:2 mix showed a decline at 28 days. These findings provide empirical data for selecting lime-surkhi mortars in heritage repair and low-load masonry applications.

Zitieren

APA

Bharati, P., Khatakho, R., Byanju, R., Suwal, S., & Prajapati, R. S. (2026). Experimental Investigation of Compressive and Flexural Strength of Lime-Surkhi Mortar. International Journal on Engineering Technology, 3(2), 317-326. https://doi.org/10.3126/injet.v3i2.95602

Vancouver

Bharati P, Khatakho R, Byanju R, Suwal S, Prajapati RS. Experimental Investigation of Compressive and Flexural Strength of Lime-Surkhi Mortar. International Journal on Engineering Technology. 2026;3(2):317-326. doi:10.3126/injet.v3i2.95602

BibTeX
@article{Bharati2026,
  author = {Bharati, Prashant and Khatakho, Rajwala and Byanju, Rojan and Suwal, Salina and Prajapati, Ratna Shova},
  title = {Experimental Investigation of Compressive and Flexural Strength of Lime-Surkhi Mortar},
  journal = {International Journal on Engineering Technology},
  year = {2026},
  volume = {3},
  number = {2},
  pages = {317--326},
  doi = {10.3126/injet.v3i2.95602}
}
Kostenlos starten →