EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

A multi-sensor IoT framework for real-time detection and prevention of sewage gas explosions in domestic and occupational sanitation systems

Ramu Penki, Boddu Jagadeesh, S Arun Kumar, Vutukuri Poornaprasanth, Saketi Sai Teja Swaroop

International Journal of Occupational Safety and Health · 10.07.2026 · 16 (2) · 240-250

DOI: 10.3126/ijosh.v16i2.85573 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Occupational Safety and Health, online erschienen am 10.07.2026. Verfasst von Ramu Penki und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

Methane and toxic gases build up in sewer pipes and septic tanks and are extremely dangerous in their ability to cause explosions and poisoning to workers in the confined sewer. The traditional monitoring controls, like infection ventilation and human checking, cannot be used to offer real-time protection.

Methods

In this work, the authors show an Internet of Things (IoT)-enabled cyber-physical system of real-time gas detection and automated mitigation. The system combines the MQ-4 (methane), MQ-135 (CO2 /NH 3/VOCs), and MQ-136 (H2S) sensors and place on the ESP32 microcontroller. A moving average-based compensation method is used to stabilize a sensor in contaminated conditions with minimum recalibration requirements. Alerts and ventilation are activated when methane reaches over 25% of the Lower Explosive Limit (LEL) using MQTT, in accordance with OSHA and NFPA safety requirements.

Results

Testing with 250 cases indicated that the system is reliably able to detect hazards, alert, and mitigate without failure. The response time was 8.2 seconds on average, which is a safeguard against gas buildup. Multi-gas sensitivity (±18% was within a reasonable range, and the system was able to run on backup power up to 18 hours.

Conclusion

The offered IoT system would turn the sanitation safety from passive observation to active protection due to real-time multi-gas detection and automated response. It offers an affordable yet scalable way of ensuring occupational safety within dangerous confined spaces.

Zitieren

APA

Penki, R., Jagadeesh, B., Kumar, S. A., Poornaprasanth, V., & Swaroop, S. S. T. (2026). A multi-sensor IoT framework for real-time detection and prevention of sewage gas explosions in domestic and occupational sanitation systems. International Journal of Occupational Safety and Health, 16(2), 240-250. https://doi.org/10.3126/ijosh.v16i2.85573

Vancouver

Penki R, Jagadeesh B, Kumar SA, Poornaprasanth V, Swaroop SST. A multi-sensor IoT framework for real-time detection and prevention of sewage gas explosions in domestic and occupational sanitation systems. International Journal of Occupational Safety and Health. 2026;16(2):240-250. doi:10.3126/ijosh.v16i2.85573

BibTeX
@article{Penki2026,
  author = {Penki, Ramu and Jagadeesh, Boddu and Kumar, S Arun and Poornaprasanth, Vutukuri and Swaroop, Saketi Sai Teja},
  title = {A multi-sensor IoT framework for real-time detection and prevention of sewage gas explosions in domestic and occupational sanitation systems},
  journal = {International Journal of Occupational Safety and Health},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {240--250},
  doi = {10.3126/ijosh.v16i2.85573}
}
Kostenlos starten →