Suitability assessment of indigenous clay deposits for drilling fluid application: A case study of Egbeta clay
Applied Journal of Physical Science · 30.04.2026 · 7 (2) · 49-58
DOI: 10.31248/ajps2026.136 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Journal of Physical Science, online erschienen am 30.04.2026. Verfasst von P. O. Obeta und 1 weiteren Autor:innen.
Abstract (Originalsprache)
The reliance on imported bentonite for drilling fluid formulation in Nigeria poses significant economic challenges and limits local content development. This study evaluates the suitability of indigenous clay deposits from the Egbeta community, Edo State, for water-based drilling fluid applications. Clay samples were collected and subjected to laboratory analyses, including moisture content, pH, mud weight, rheological properties, sand content, and cation exchange capacity (CEC). Local additives such as lime and starch were incorporated to assess their influence on mud performance. Results indicated that Egbeta clay exhibits low moisture content (2.3–5.0%), acidic pH (4.17–4.51), poor viscosity, weak gel strength (1–3 lb/100 ft²), and low yield point, reflecting limited hydration and suspension capacity. Moderate CEC values (3.0–4.0 meq/100 g) suggested some ion exchange potential, but overall rheological behaviour remained below standard drilling fluid requirements. Additive incorporation produced slight improvements in viscosity and gel strength, yet performance was insufficient for direct industrial application. High sand content (2.5–3.0%) further highlighted the presence of impurities requiring beneficiation. The findings demonstrate that untreated Egbeta clay is unsuitable for direct drilling fluid use. However, with beneficiation, chemical activation, and incorporation of polymers or nanomaterials, its properties could be enhanced to meet industrial standards. This study provides baseline data on Egbeta clay and underscores its potential as a local substitute for imported bentonite, supporting Nigeria’s petroleum sector and local content initiative.
Zitieren
APA
Obeta, P. O., & Ogojiaku, G. (2026). Suitability assessment of indigenous clay deposits for drilling fluid application: A case study of Egbeta clay. Applied Journal of Physical Science, 7(2), 49-58. https://doi.org/10.31248/ajps2026.136
Vancouver
Obeta PO, Ogojiaku G. Suitability assessment of indigenous clay deposits for drilling fluid application: A case study of Egbeta clay. Applied Journal of Physical Science. 2026;7(2):49-58. doi:10.31248/ajps2026.136
BibTeX
@article{Obeta2026,
author = {Obeta, P. O. and Ogojiaku, G.},
title = {Suitability assessment of indigenous clay deposits for drilling fluid application: A case study of Egbeta clay},
journal = {Applied Journal of Physical Science},
year = {2026},
volume = {7},
number = {2},
pages = {49--58},
doi = {10.31248/ajps2026.136}
}
EUVIMED