Effect of Aluminum Casting Dross Addition on Mechanical Properties and Microstructure in Aluminum Foam Production
El-Cezeri Fen ve Mühendislik Dergisi · 2022
DOI: 10.31202/ecjse.1020426 ↗Kurz gefasst
Fachartikel in der Zeitschrift El-Cezeri Fen ve Mühendislik Dergisi, 2022. Verfasst von Pinar UYAN und 1 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben.
Abstract (Originalsprache)
In the study, Al foams were produced using 6063 Al alloy casting dross and Boric acid. Foam materials were sintered at 130 ºC for 1 hour and at 550 ºC for 3 hours. The microstructure was analyzed with optical and scanning electron microscopes (SEM). Compression strength was measured with a compression tester. The porosity increased from 34.8% to 37.8%, the compressive strength increased from 12.43 MPa to 20.25 MPa, and the hardness increased from 98 HV to 115 HV with increasing dross amount.
Zitieren
APA
UYAN, P., & KÖRPE, N. Ö. (2022). Effect of Aluminum Casting Dross Addition on Mechanical Properties and Microstructure in Aluminum Foam Production. El-Cezeri Fen ve Mühendislik Dergisi. https://doi.org/10.31202/ecjse.1020426
Vancouver
UYAN P, KÖRPE NÖ. Effect of Aluminum Casting Dross Addition on Mechanical Properties and Microstructure in Aluminum Foam Production. El-Cezeri Fen ve Mühendislik Dergisi. 2022. doi:10.31202/ecjse.1020426
BibTeX
@article{UYAN2022,
author = {UYAN, Pinar and KÖRPE, Neşe ÖZTÜRK},
title = {Effect of Aluminum Casting Dross Addition on Mechanical Properties and Microstructure in Aluminum Foam Production},
journal = {El-Cezeri Fen ve Mühendislik Dergisi},
year = {2022},
doi = {10.31202/ecjse.1020426}
}
EUVIMED