Simulation Analysis of CMOS Device Fabrication Using Silvaco TCAD: Process Optimization for Biomedical Applications
Journal of Wasit for Science and Medicine · 28.02.2026 · 19 (1) · 68-81
DOI: 10.31185/jwsm.608 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Wasit for Science and Medicine, online erschienen am 28.02.2026. Verfasst von Zeina Abbas Salman. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper describes a detailed simulation of CMOS device manufacturing using Silvaco TCAD software. The simulated CMOS devices reached the final source/drain doping density of about 7x1019 cm-3 in both NMOS and PMOS devices, and the threshold voltage of about ±1 V, which can be used in many logic applications. N-well and P-well pre-annealing concentrations were 2x1017 cm-3 and 6x1017 cm-3 respectively with post drive-in diffusion depths of 2-3 μm. The LOCOS process was able to generate 0.5 μm field oxide to isolate devices. This paper offers specific information on process parameter selection and optimization and shows that process simulation is valuable in exhibiting fabrication-device characteristic relations. Moreover, the paper explains the CMOS fabrication infrastructure in biomedical sensor applications, in which CMOS technology has demonstrated notable potential biosensors, point-of-care diagnostics, and implantable medical devices.
Zitieren
APA
Salman, Z. A. (2026). Simulation Analysis of CMOS Device Fabrication Using Silvaco TCAD: Process Optimization for Biomedical Applications. Journal of Wasit for Science and Medicine, 19(1), 68-81. https://doi.org/10.31185/jwsm.608
Vancouver
Salman ZA. Simulation Analysis of CMOS Device Fabrication Using Silvaco TCAD: Process Optimization for Biomedical Applications. Journal of Wasit for Science and Medicine. 2026;19(1):68-81. doi:10.31185/jwsm.608
BibTeX
@article{Salman2026,
author = {Salman, Zeina Abbas},
title = {Simulation Analysis of CMOS Device Fabrication Using Silvaco TCAD: Process Optimization for Biomedical Applications},
journal = {Journal of Wasit for Science and Medicine},
year = {2026},
volume = {19},
number = {1},
pages = {68--81},
doi = {10.31185/jwsm.608}
}
EUVIMED