EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of a Passive Direct Polymer Electrolyte Fuel Cell Using L-Ascorbic Acid as a Fuel

Ashish P. Umarkar, Rajkumar Chadge, Naveen K. Shrivastava, Neeraj Sunheriya, Jayant Giri, Mohammad Kanan

Reports in Mechanical Engineering · 20.02.2026 · 6 (2) · 129-145

DOI: 10.31181/rme537 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Reports in Mechanical Engineering, online erschienen am 20.02.2026. Verfasst von Ashish P. Umarkar und 5 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study involves an experimental investigation of the electrochemical performance of a passive direct ascorbic acid fuel cell (DAAFC), evaluating its potential as a sustainable energy source. A single-cell assembly of DAAFC integrated with a Nafion® 117 membrane measuring 5 cm x 5 cm was fabricated and evaluated. The influence of variation in significant parameters, including ascorbic acid feed concentration, cell positioning (horizontal/vertical), bolt clamping torque, and operating temperature, was investigated. The outcome of the experiment highlights the importance of controlling these parameters for enhanced electrochemical performance of the passive DAAFC system. Different cell AA concentrations were fed to the system from 0.25 M to 1.75 M, at which the maximum power density of 0.633 mW/cm2 was obtained at 1.5 M. Further, this concentration was used for the remainder of the experimentation. For each condition of the cell parameter, a specific experimental procedure is followed to identify the optimum value of the selected parameter. The passive DAAFC shows optimum electrochemical performance when applied with 8 Nm of bolt torque. The horizontal cell orientation and 60°C operating temperature were identified as the optimum parameters among the experimental attributes. The cell produces a maximum power density of 0.838 mW/cm2 at 60°C among all experimental sets. These results demonstrate that careful optimisation of operating conditions significantly enhances the electrochemical performance of DAFC. The results show that each of these parameters significantly affects the electrochemical performance of the passive DAAFC. Moreover, the study confirms the potential of using ascorbic acid as an effective fuel for electricity generation, and the outcome of this study is expected to serve as a useful reference for guiding future research and development efforts in DAAFC systems.

Zitieren

APA

Umarkar, A. P., Chadge, R., Shrivastava, N. K., Sunheriya, N., Giri, J., & Kanan, M. (2026). Experimental Investigation of a Passive Direct Polymer Electrolyte Fuel Cell Using L-Ascorbic Acid as a Fuel. Reports in Mechanical Engineering, 6(2), 129-145. https://doi.org/10.31181/rme537

Vancouver

Umarkar AP, Chadge R, Shrivastava NK, Sunheriya N, Giri J, Kanan M. Experimental Investigation of a Passive Direct Polymer Electrolyte Fuel Cell Using L-Ascorbic Acid as a Fuel. Reports in Mechanical Engineering. 2026;6(2):129-145. doi:10.31181/rme537

BibTeX
@article{Umarkar2026,
  author = {Umarkar, Ashish P. and Chadge, Rajkumar and Shrivastava, Naveen K. and Sunheriya, Neeraj and Giri, Jayant and Kanan, Mohammad},
  title = {Experimental Investigation of a Passive Direct Polymer Electrolyte Fuel Cell Using L-Ascorbic Acid as a Fuel},
  journal = {Reports in Mechanical Engineering},
  year = {2026},
  volume = {6},
  number = {2},
  pages = {129--145},
  doi = {10.31181/rme537}
}
Kostenlos starten →