EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling Multibody Systems Subjected to Impact with Friction

Hesham Elkaranshawy, Nasser Bajabaa

Reports in Mechanical Engineering · 24.06.2025 · 6 (1) · 12-26

DOI: 10.31181/rme445 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Reports in Mechanical Engineering, online erschienen am 24.06.2025. Verfasst von Hesham Elkaranshawy und 1 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Impact phenomena occur in a wide range of multibody systems, either accidentally or as part of their functional operations. Regardless of its serious degrading effects, it is challenging to model, especially when friction is considered, since the discontinuity due to friction is added to the discontinuity of the velocity due to impact. In this paper, an effective scheme applicable to multibody systems with motion constraints subjected to impacts with friction is developed. The main contribution of this study is the development of a numerical strategy to solve the nonlinear differential equations of motion for three-dimensional multibody systems experiencing impact with friction, as well as the analytical solution of these equations for planar multibody systems. Routh’s incremental method is used to differentiate between the three possible modes during the contact period: continuous sliding, sticking and discontinuous sliding. A critical coefficient of friction is specified, which depends only on the system configuration, and it is used to determine whether the mode of contact is sliding or sticking. Three definitions for the coefficient of restitution are introduced to denote the end of impact. The proposed method is applied to a case study, and the dynamical behaviours are illustrated, with an emphasis on the effect of using each of the three coefficients of restitution. The results demonstrate that the present methodology is a powerful tool for modeling and simulating such practical problems and for assessing the use of different coefficients of restitution.

Zitieren

APA

Elkaranshawy, H., & Bajabaa, N. (2025). Modeling Multibody Systems Subjected to Impact with Friction. Reports in Mechanical Engineering, 6(1), 12-26. https://doi.org/10.31181/rme445

Vancouver

Elkaranshawy H, Bajabaa N. Modeling Multibody Systems Subjected to Impact with Friction. Reports in Mechanical Engineering. 2025;6(1):12-26. doi:10.31181/rme445

BibTeX
@article{Elkaranshawy2025,
  author = {Elkaranshawy, Hesham and Bajabaa, Nasser},
  title = {Modeling Multibody Systems Subjected to Impact with Friction},
  journal = {Reports in Mechanical Engineering},
  year = {2025},
  volume = {6},
  number = {1},
  pages = {12--26},
  doi = {10.31181/rme445}
}
Kostenlos starten →