EUVIMEDEUVIMED entdecken
Crossref

Calcium-Controlled Tuning of Zn0.25Co0.5Ca0.25Fe1.97Ba0.03−yCayO4 Ferrites for MHz-Range Electromagnetic Interference Shielding in Biomedical Electronic Systems

Muhammad Imran Arshad, Maria Akhtar, Zeshan Munir, Al-Badrawy Abo El-Nasr, M. Ajaz-un-Nabi, Nasir Amin, Hafiz Tauqeer Ali, Kiran Mehmood, Uswa Mubarik

Digest Journal of Nanomaterials and Biostructures · 03.11.2026 · 21 (4)

DOI: 10.31083/djnb62021 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Digest Journal of Nanomaterials and Biostructures, online erschienen am 03.11.2026. Verfasst von Muhammad Imran Arshad und 8 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: Deanship of Graduate Studies and Scientific Research, Taif University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Spinel ferrites are widely used for electromagnetic interference (EMI) shielding in biomedical devices and high-frequency electronics because of their tunable structural, magnetic, and dielectric properties. However, the effect of progressive Ca2+ substitution on the properties of Zn0.25Co0.5Ca0.25Fe1.97Ba0.03−yCayO4 ferrites has not been systematically investigated.

Methods

Zn0.25Co0.5Ca0.25Fe1.97Ba0.03−yCayO4 (y = 0.00, 0.01, 0.02, 0.03) nanoparticles were synthesized using a sol–gel autocombustion method, and their structural, vibrational, magnetic, electrical, and dielectric properties were characterized using X-ray diffraction (XRD) with Rietveld refinement, Raman spectroscopy, vibrating sample magnetometry (VSM), temperature-dependent current–voltage measurements, and dielectric spectroscopy (4Hz–8 MHz).

Results

XRD with Rietveld refinement revealed a predominantly single-phase cubic spinel structure with crystallite sizes of 15.10–18.06 nm and trace α-Fe2O3. Raman spectra revealed five characteristic modes, while peak shifts and A1g subband splitting indicated Fe2+/Fe3+ redistribution and increased inversion. The y = 0.02 sample exhibited the highest saturation magnetization (72.73 emu/g), coercivity (746.92 Oe), anisotropy constant (56,587 erg/cm3), and resonance frequency (16.06 GHz), whereas the y = 0.01 sample showed the highest alternating-current conductance. All samples showed semiconducting behavior and non-Debye dielectric relaxation.

Conclusions

Controlled Ba2+/Ca2+ substitution effectively tailors the structural, magnetic, electrical, and dielectric properties of Zn–Co spinel ferrites. The y = 0.02 composition demonstrates the best overall performance and is therefore a promising candidate for MHz-range EMI shielding and biomedical electronic applications.

Förderung

  • Deanship of Graduate Studies and Scientific Research, Taif University

Zitieren

APA

Arshad, M. I., Akhtar, M., Munir, Z., El-Nasr, A. A., Ajaz-un-Nabi, M., Amin, N., Ali, H. T., Mehmood, K., & Mubarik, U. (2026). Calcium-Controlled Tuning of Zn0.25Co0.5Ca0.25Fe1.97Ba0.03−yCayO4 Ferrites for MHz-Range Electromagnetic Interference Shielding in Biomedical Electronic Systems. Digest Journal of Nanomaterials and Biostructures, 21(4). https://doi.org/10.31083/djnb62021

Vancouver

Arshad MI, Akhtar M, Munir Z, El-Nasr AA, Ajaz-un-Nabi M, Amin N, et al. Calcium-Controlled Tuning of Zn0.25Co0.5Ca0.25Fe1.97Ba0.03−yCayO4 Ferrites for MHz-Range Electromagnetic Interference Shielding in Biomedical Electronic Systems. Digest Journal of Nanomaterials and Biostructures. 2026;21(4). doi:10.31083/djnb62021

BibTeX
@article{Arshad2026,
  author = {Arshad, Muhammad Imran and Akhtar, Maria and Munir, Zeshan and El-Nasr, Al-Badrawy Abo and Ajaz-un-Nabi, M. and Amin, Nasir and Ali, Hafiz Tauqeer and Mehmood, Kiran and Mubarik, Uswa},
  title = {Calcium-Controlled Tuning of Zn0.25Co0.5Ca0.25Fe1.97Ba0.03−yCayO4 Ferrites for MHz-Range Electromagnetic Interference Shielding in Biomedical Electronic Systems},
  journal = {Digest Journal of Nanomaterials and Biostructures},
  year = {2026},
  volume = {21},
  number = {4},
  doi = {10.31083/djnb62021}
}
Kostenlos starten →